外文翻譯--汽車車架的單體結構

附 錄 附錄 A The frame is the most basic test bench car, all the suspension and turned to connect components are installed in frame above. If car frame flexible is too big, can make cars can neither turned, also cannot normal control. And if the car too rigid frame structure, and would cause unnecessary vibration passed to the driver and passengers seat cabins. Auto frame and suspension structure design is not only the vehicle noise size and the decision of the vibration amplitude strength, but also will affect the quality of the car and the normal control vehicle. Car manufacturers in their production car are used in several different frame structure. Among them, through the seventy s the most commonly used is shell and girders of fission structure. At present it is still in large trucks, small tonnage truck and a truck on the application. In car shell and the beam structure in the fission, engine, transmission device, transmission gear and the car is through shell insulation devices in the body on the sole fixed. The frame of the internal insulation devices is artificial rubber pad to be able to stop road uneven and engine noise and vibration of the work related to the driver and passengers cockpit. The second is the single structure of automobile frame. This kind of design so far in the modern car is the most commonly used. According to the strength of the frame monomer to points, design have light structure. In this car structure as part of the beam frame welding to be directly on the shell. The weight of the chassis increased the strength of the beam. Transmission gears and transmission device via big and soft artificial rubber insulation mat installed in the frame monomer. Insulation pad weakened the noise transmission and vibration. If the insulation pad too soft, will cause transmission gears and transmission device displacement. The displacement called soft quantity, it will affect the manipulation of car performance and control performance. If the insulation pad too hard, cannot play its isolation and reduce the role of the vibration noise. Car manufacturers well-designed insulation mat, put them in proper place device car, in order to reduce the noise, vibration, make the transmission buffer for driving car, drivers and passengers take comfort. The performance of the insulation mat with use fixed number of year changing, when the old car becomes the performance of the original also changed. He third kind of structure is the first two kinds of structure of the main characteristics unifies in together. It in front of the car used car beam, in the short HouCang use a frame. A monomer, and short rigid part of the beams action is insulation to enhance the car. Car manufacturers in the car that choose low production cost and at the same time to meet with noise, vibration control performance requirements of high driving frame structure. The old large vehicles, trucks, and trucks often use shell and girders of fission structure. A new, smaller vehicles often use single structure frame. Engine piston connecting rod group The piston connecting rod group of piston, piston, piston pins, connecting rod, connecting rod bearings etc. Function: the piston is the work of gas pressure to bear, and through the piston pin to connecting rod rotation, the piston driven crankshaft top or part of the combustion chamber. Working conditions: the piston in high temperature and high pressure, high speed, bad lubrication under the conditions of the job. The piston directly with high temperature, gas contact instantaneous temperatures up to 2500 K above, therefore, heat, and cooling conditions and serious is very poor, so the piston work temperature is very high, the top as high as 600 to 700 K, and the temperature distribution is not uniform； The piston top bear gas pressure to do work, especially the greatest pressure, the gasoline engine trip up to 3 5 MPa, diesel engine as high as 6 9 MPa, this makes the piston impact, and bear the role of the lateral pressure, therefore, the piston should have enough heat resistance, to try to reduce the piston, piston cooling heating strengthen heat transfer surface, suitable enlargement, make the tops of the pistons. The highest temperature drop Inside the cylinder piston at high speed (8 to 12 m/s) reciprocating motion, and speed changing constantly, which has made a big inertia force, driving the piston is much additional load. The piston in this harsh conditions, can produce deformation work and accelerated wear, still can produce additional load and thermal stress, and the chemical corrosion function by gas. In order to reduce reciprocating inertia force, must reduce the weight of the piston as much as possible. The piston is in high temperature and high pressure, high speed (piston average speed can reach 101115 m/s) under the working conditions of the poor, the lubrication, piston and cylinder wall friction between serious. To reduce the friction, the piston surface must wear-resisting. Requirements: 1)To have enough stiffness and strength, power transmission and reliable； 2)Thermal conductivity, resistance to high pressure, high temperature resistant, wear resistance； 3) Quality, light weight, small to minimize reciprocating inertia force. Aluminum alloy material basically meet the above requirements, therefore, the piston typically use the high-strength aluminum alloy, but in some low speed diesel engine USES the senior cast iron or heat resistant steel. Suspension system Suspension shock absorbers and control including a spring, connecting rod device. It must be able to support the body weight and enough to load. Suspension also should be able to withstand the engine and braking to it an opposite reaction. Suspension system is the most important function of the tire and road surface contact time as far as possible the long. In support of body and load, even in rough roads should be more so. The four tire tread come in contact with the car is the only part. All output power, engine to force and power system through come in contact with the pavement of the tire tread work. Whenever tires and road surface contact or car started when the car skid, control ability (power, to force, braking force) will be weakened or even lost. Car body is supported by spring, spring can be divided into the spiral, steel plate type, twist bar type and inflatable. The spiral spring is the most widely used in modern car type. The spiral, torsion bar type and inflatable spring is need to use the connecting rod and connecting with the wheel arm in place. Leaf spring provide the horizontal and vertical vehicle control, in order to prevent the car wheel in cars, they often unnecessary displacement with truck in the van and truck. Suspension system is along with the development of the passenger car and change and improvement. A luxury car, special vehicle, small cars and light trucks are designed completely different. Modern tire improvement continuously improve the vehicles operating performance, it is the improvement and shock absorbers, steering system and suspension control device of synchronous improvement together. In modern car of the manipulation conditions need to tires and the road, so that safe, correct contact to control and motor vehicles. To want to maximum driving safety, to remember this four tires must in any time and the road phase contact. At the same time to consider the vehicle steering flexibility, tire wear resistance, automobile driving comfort and driving safety, in order to achieve the effective control of the car. Suspension system is divided into front suspension and after suspension. The front suspension design has been rapid development. From relatively coarse hard shaft structure to the development of the modern light, high strength, support type independent suspension structure, and by increasing the connecting rod device and make the cars performance is improved. Suspension structure is improved with the improvement of the road, and drivers need and the improvements. Most lead the engine, rear wheel drive car USES a simple after the dependency of the suspension. But a rear wheel drive independent suspension structure is complex, and high cost, and only used for a bus. To lead the engine of the car front wheel drive, through the transmission device, moved to the front suspension after only used to regulate driving control and the reaction of braking. This has the simplified of independent suspension institutions, half independent suspension institutions and independent suspension after the application, the latter a large institutions used in the design of the structure of new vehicles. 附錄 B 車架是汽車最基本的臺架，所有的懸架和轉向連接部件都安裝在車架上面。如果汽車車架柔性過大，會使汽車既無法轉向，也無法進行正常操縱。而如果汽車車架結構剛性過大，又會引起不必要的震動傳遞給駕駛員和乘客的座艙室。汽車車架和懸架的結構設計不僅決定了汽車噪聲大小和震動的幅度強度，而且也將影響到汽車的質量和車輛的正常操縱。 汽車制造廠商們?cè)谒麄兩a(chǎn)的汽車上都使用了幾種不同的車架結構。其中，整個七十年代最常使用的是殼體和大梁的分體結構。目前它仍然在大型貨車、小噸位貨車和卡車上應用著。在汽車殼體和大梁的分體結 構里，發動機、傳動裝置、傳動齒輪和車殼都是通過絕緣裝置固定在車身大梁上。車架內部的絕緣裝置是人造橡膠緩沖墊，能夠阻止道路不平和發動機工作引起的噪音和震動傳到駕駛員和乘客的座艙里。 第二種是汽車車架的單體結構。這種設計到目前為止在現代汽車上是最常用。單體車架按所需的強度來分，設計有輕型結構。在這種汽車結構中大梁作為車架的一部分被直接焊接到殼體上。底盤的重量增加了大梁的強度。傳動齒輪和傳動裝置經由大而軟的人造橡膠絕緣墊安裝在單體車架上。絕緣墊減弱了噪聲的傳動和震動。若絕緣墊太軟，將會引起傳動齒輪和傳動裝置位移。 這種位移稱為柔量，它會影響到汽車的操縱性能和控制性能。若絕緣墊太硬，則不能起到應有的隔絕噪音和減小震動的作用。汽車制造廠商們精心地設計絕緣墊，把它們裝置在汽車適當?shù)牡胤?，以降低噪聲，緩沖震動的傳送，使汽車便于駕駛，駕駛員和乘客乘坐舒適。絕緣墊的性能隨使用年限發生變化，當汽車變舊時原先的性能也隨之改變。 第三種結構是把前兩種結構的主要特點結合在一起。它在汽車前艙使用了短車梁，在汽車后艙使用了單體車架。單體部分剛性很大，而短的車梁增強了絕緣作用。 汽車制造廠家們?cè)谄嚿线x擇那種生產成本低而同時又符合對噪音震動， 駕駛操縱性能要求很高的車架結構。老式的大型的車輛、貨車、和卡車通常使用殼體和大梁的分體結構。較新的，較小型的車輛通常使用單體結構的車架。 發動機活塞連桿組 活塞連桿組由活塞、活塞環、活塞銷、連桿、連桿軸瓦等組成。 功用：活塞的功用是承受氣體壓力，并通過活塞銷傳給連桿驅使曲軸旋轉，活塞頂部還是燃燒室的組成部分。 工作條件：活塞在高溫、高壓、高速、潤滑不良的條件下工作?；钊苯优c高溫氣體接觸，瞬時溫度可達 2500K 以上，因此，受熱嚴重，而散熱條件又很差，所以活塞工作時溫度很高，頂部高達 600 700K，且溫度分 布很不均勻；活塞頂部承受氣體壓力很大，特別是作功行程壓力最大，汽油機高達 3 5MPa，柴油機高達 6 9MPa，這就使得活塞產生沖擊，并承受側壓力的作用，因此，活塞應有足夠的耐熱性，要盡量減小活塞的受熱面，加強活塞的冷卻，適當增大傳熱面，使活塞頂部的最高溫度下降?；钊跉飧變?nèi)以很高的速度 (8 12m/s)往復運動，且速度在不斷地變化，這就產生了很大的慣性力，使活塞受到很大的附加載荷?；钊谶@種惡劣的條件下工作，會產生變形并加速磨損，還會產生附加載荷和熱應力，同時受到燃?xì)獾幕瘜W(xué)腐蝕作用。