鋁質直升飛機平臺訂貨技術協議

1、1ALUMINIUM HELIDECK：鋁質直升飛機平臺1.1 GENERAL INFORMATION, ALUMINIUM HELIDECK：鋁質直升機升降平臺總說明Helideck Size:22.2m x 22.2m. Octagonal shape.22.2 米*22.2 米，八角形Design Helicopter 直升機設計規格：Sikorsky S-92N/S61Classification Authority 船級社Flag 掛旗Rules and Regulations 規范規則Ex-zone 防爆區域：Design temperature 設計溫度：ABS 美國船級社：X：

2、SOLAS 2013、UK、 CAA、 CAP 437 2013 、 ABS Class Rules Safe Zone.安全區0 degree C to +45 degree C0 度到 45 度區間Material for helideck 直升機平臺材料：Aluminium AA 5083 for plates 鋁板 AA5083Aluminium AA 6005-T6 / AA 6082-T6 for extruded profiles.鋁型材 AA6005-T6 / AA 6082-T6All the Aluminium material should be passivation.

3、 所有鋁材都必須鈍化處理。SS A4（316）stress grade 80 according the calculationfor bolts, quantity of 5% Spare。螺栓 SS A4（316），受力等級根據計算確認，數量上備 5%的余量Load 12.8T 承重 12.8T1.2TECHNICAL INFORMATION, ALUMINIUM HELIDECK 鋁質直升機升降平臺技術要求1.2.1Aluminium Pancake 鋁質平臺部分The Aluminium Helideck will be prefabricated in our workshop in

4、 suitable units for transport to yard-site in 40' containers.鋁制平臺在車間預裝后用集裝箱運至船廠At yard site the units have to be assembled to one complete Helideck Pancake. The Helideck Pancake has to be installed onto the support structure and then lifted on board the platform for installation.Platforms and st

5、airs have also to be installed.在船廠所有的構件將被組成一個完整的直升機升降平臺。鋁制平臺（包括樓梯）安裝在支撐結構之上從而組成一個整體，然后整體吊裝到船上。Basic offer is that the yard will be responsible for the assembly and installation. Seller will offer the installation work, This work will normally be done within a 20 day period by a crew of 5-6men +1 sup

6、ervisor.基本設想是由船廠完成整個直升機平臺的裝配和安裝。這項工作可以在一位主管 56 個工人的工作下，整個工程會在 20 天之內完成。Assembly and installation will only require bolting. No aluminium welding will be required on site.在船廠裝配和安裝的時候，全部采用螺栓連接，現場不需要焊接。Scope of supply:供貨范圍Design of Aluminium Pancake.鋁制平臺設計Approval from Authorities (ABS class) is includ

7、ed. The cost for ABS inspection / approval is included.The drawing for ABS approval will entrust to send to ABS by Yard. (To be sent by designer for substitute to send forapproval ). Seller is responsible to close the Class comments.取得船級社認可（ABS）采取第檢驗方式。含 ABS 檢驗的費用。送審圖委托船廠提供給送審設計公司替代送審 ABS, 賣家負責對退審意見

8、澄清及解決。Aluminium Pancake Structure, consisting of：鋁制平臺結構包括：a. Helideck high friction top profile.直升機平臺表面防滑b. Girder framework oirders.用工字梁組成的框架c.Necessary bolts, clamps and sealing compound for assembly.必要的螺栓，固定夾及組裝所需密封膠d.Sealing plate for sealing the split in top profiles.密封板Drainage Gutter around t

9、he perimeter, drain piping from each outlets of gutter collect into one outlet connecting tovessel drain piping including, Necessary insulation of Aluminium and steel is including. vessel drain piping is yardsupplied：沿周邊設置鋁材排水溝,排水溝各個接口采用無縫 緣，與船上的排水管連接。船上的排水管由船廠供。a.Outlet nozzles.排水嘴匯集到 1 個接口，鋁和鐵連接接口

10、處需做絕b.Brackets for fixing of perimeter and floodlights.四周燈光及泛光燈固定支架c.Brackets for fixing of landing net 、landing net and cable-tray.著陸網及其固定裝置及電纜托架18 off - Tie - down Points for anchoring of the Helicopter. The Tie - down points will be of recessed type.有 18 個凹進式用于直升機固定。Aluminium and steel to be isol

11、ated to prevent corrosion. Neoprene will be supplied for this purpose.用橡膠墊塊將鋁和鐵來防止腐蝕。All connecting bolts, insulation details etc for connection between steel and aluminium will be provided.所有連接鋁和鐵的連接螺栓上都會有絕緣材料。Safety Net around the perimeter will be included. 平臺四周將鋪設鋁合金安全網。Painting of the Helideck

12、Markings according to Rules and Regulations has to be done by yard according to Seller drawings (because delivery is a container package).Maker supply the thin film for all necessary mark painting. All paint of the deck is include in the supply.在船廠將根據賣方提供的圖紙相關規定油漆直升機升降平臺的標記（因為從車間到船廠是用集裝箱發貨，所以在車間不能油漆

13、這個標記）賣方提供所有標記的薄膜供油漆標記用。直升機平臺所有噴涂標記（含背景色） 的油漆由賣方供。The helideck will be of a type with integrated friction grooves or sandblasted, tested and approved.直升機升降平臺的摩擦槽或噴砂面必須經測試和批準。1.2.2 Support Structure 支撐結構As base case, the upper part of support structure will also be made in aluminium. This will not onl

14、y save weight, but also be very beneficial for the owner regarding maintenance. Interface between yard's steel structure and the aluminium will then be approx 600mm below top of helideck.作為基礎部分，支撐結構的上面部分也需要用鋁來制作。這不僅考慮到重量可以減輕也有利于業主進行維護。 從船上支撐鋼結構和鋁結構的分界面到直升機平臺頂部以下的距離約為 0.6 米。NOTE:All area in front

15、 of the wheelhouse windows will be clear of helideck structures as far as possible in order to meet NAUT - OSV requirements. See below pictures as examples:注意：必須遵守 NAUT - OSV 的相關規定，直升機平臺結構離駕駛艙前部區域須有足夠遠的距離，從而保證駕駛視線良好。Scope of supply:供貨范圍Design Steel Support structure.鋼制支撐結構的設計Approval from ABS approv

16、al (ABS) is included.取得 ABS 船級社認可（ABS）。Supply of Aluminium Support structure, height between 3000-3500mm according to calculations and required height for walkway （min 2100mm）.根據受力計算和考慮到人行道的高度（至少 2100mm），整個鋁制支撐結構的高度在 3 米到 3.5 米之間。Design and class approval for reinforce under deck of forward steel pi

17、llars is supplied by Yard. (To be supplied byyard according to designer Company design). 與船甲板連接的飛機平臺下部支柱甲板加強結構設計及送審由船廠委托的設計方負責,(此甲板加強結構需船廠根據設計方的設計來制造)Steel Ladder is yard supplied, insulation is supplied by maker. 所有鋼制梯子由船廠供。梯子與鋁的絕緣由賣家供1.2.3 Access Ways 通道Scope of supply:供貨范圍The Emergency ways (stee

18、l) and stairs (steel)will be supplied by shipyard.鋼制應急走道和樓梯由船廠提供.1.2.4HELI-DECK FIRE主要功能 Main Function 在全著陸區域的任意位置。ING SYSTEM 直升機平臺消防系統30 秒內（從火災突發事故開始那一刻起到實際消防系統到論流量），到達安滅火將被考慮為第一介質，用來對付燃油飛濺及其它類型火災；干粉及二氧化碳將被考慮為補充滅火介質。Within 30 seconds (measured from the time of incident to actual production at the r

19、equired rate), foam will be reach any part of the safe landing area(SLA), While foam is considered the principal media for dealing with fires involving fuel spillages, and other wide variety of fire incidents, Dry powder and the gaseous agents Co2 are generally considered acceptable as complementary

20、 media.供貨范圍 Scope of Supply:滅火系統 Foam system1set：ABSA.設計計算 Design Specification:直升機平臺尺度 Helideck D-value：22.2m噴射率 Foam jet rate：6L/min·m2噴射流量 Helideck application rate: 6.0X xr2=6.0x3.14x11.15x11.15=2344L/min海水混合比 Foam mixing ratio to sea water：3%劑型號： AFFF2 套2 Fire Monitors，每套流量 jet rate 2400L/

21、min噴射時間 Foam jet time：5 minutes液設計用量 Foam liquid design quantity：F=2400l / min.X 3. X 5min / 100 = 360 L液貯罐容積取 400L消防泵流量 Capacity of fire pump消防泵供水量(supply water capacity)：Q1=2400x（1-0.03）=2328 L消防泵流量(Capacity of fire pump)：Q2=2328x60x（1-0.03）/1000=135.48 m3/h槍流量(Capacity of Foam gun)：Q3=400x60/1000

22、=24 m3/h消防泵總流量(Capacity of fire pump)：Q4=（Q2+Q3）=159.5 m3/hB.文件 References:國際海上人命安全公約及 SOLAS2013 綜合版公約要求及International Convention for the Safety of Life at Sea and SOLAS2013 integrated version of the requirements of the Convention鋼質海船入級與建造規范-ABS 船級社Steel ships into the class with the construction no

23、rmsABSclassification societyCB/T3571-93 船用低倍滅火裝置CB/T3571-93 Deck low expansion foam fire extinguishing installationsISO9001-2000 質量體系設計、開發、生產、安裝和服務的質量保證模式ISO9001-2000 Quality SystemDesign, development, production, installation and service quality assurance modeC.滅火系統參數 Foam System Specification:C.1

24、保護范圍及施放數量 Scope protection and quantity本船共設一套平衡式滅火系統用于保護直升機平臺。The vessel will be set a set of balanced foam system for the protection of helicopter platform.C.2 主要組成 Main components裝置由 PHP 裝置和裝置及管路等組成。Balance foam system is combined with PHYM foam proportioning unit, foam release device and foam rel

25、ease pipes,etc.PHP 裝置由常壓液貯罐、泵組（由電機驅動）、平衡閥、比例混合器、安全泄壓閥、過濾器及相關的管件、管路等組成。PHYM unit is combined with normal pressure foam liquid tank, foam pump(include motor drivers), balance valve, ratio mixer, pressure relief safety valves, filters and the related pipes, etc.裝置主要由 2 套及套槍等組成。Foam release device is ma

26、inly combined with 2 fire monitors and 2 sets of foam guns.3設備Equipment List:C.4系統的水源來源于船舶的消防。It will be connected and obtained from vessel centralized fire water system.序號 No.名稱 Name數量 Qty.備注 Remarks1裝置Foam Proportioning Unit1由 700L 不銹鋼常壓 液貯罐， 泵組、平衡閥、3 %比例混合器、安全泄壓閥、過濾器等組成， 不含 液 Contain with SS foam

27、 tank 400L,foam pump, balance valve,3% mixer, safety relief valve and filter, ect, no foam2Fire Monitors22400 L/Min each,Stainless steel不銹鋼3槍箱Foam Gun Box2含 2 套槍及 15 米水龍帶 2 set foam gun with 15m fire hose4系統箱Foam system control box1系統啟動及To start foam system and fire monitor up or down & left or

28、right5操作說明牌Operating instruction plate16蝶閥Buttery valve27直通截止閥Stop Valve28消防栓Fire Hydrant29管路Pipes1C.5 2 臺推車式 22kg CO2 滅火器帶延長噴射器, 2 臺推車式 45kg 干火器。two (2) trolley mounted 22kg CO2 extinguisher with an extended applicator will be supplied, and two (2) wheeleddry power extinguishers, each capacity not

29、less than 45 kg,located at each main access1.2.5Safety Equipment/ 系統Safety Equipment in accordance with UK CAA： 安全系統依據標準為 UK CAACCS TYPE APPROVALa) 儲物箱包含以下項目1 套1 off - Locker containing Crash Equipment, containing:2 Fire - Axes 斧頭2 把2 Stainless Knives 不銹鋼刀2 把2 Hand Lamps 手提燈2 個1 Crow Bar 橇桿1 個1 Pair

30、 of Cutting Plies 剪鉗1 套1 Hack Saw with Spare Blade 砍鋸1 套1 Hammer 錘子1 個1 Steel Bar with a Wedged Tip 帶楔形端的鐵桿1 Pair of Sheet MShears 鋼板剪1 套1 Bolt Cutter 螺栓割刀1 個1 Lightweight Ladder 輕便梯子1 個1 Jack for at least 1/2 tonne 1/2 噸的千斤頂1 個1 MHook with a Shaft approx. 3m Long至少 3的金屬鉤子1 個b) 1off Locker containin

31、g Fireman's Outfit for 2 firemen incl. breathing equipment. (If more than two sets arerequired, this is assumed yard's supply)Quantity per fireman's set:1 套儲物箱，含兩套包括呼吸器的消防裝備，（如果需要，則需要船廠配備）1 SCBA1 套SCBA1 Fire-Proof Lifeline 防火救命繩1 根1 Hand Lamp手提燈1 個1 Small Fire-Axe 小型的消防斧1 個1 fireing and

32、Smoke Diving Suit 滅火防煙的潛水服1 套1 set of Safety Boots and Gloves 安全靴以及手套1 套1 Fire Helme 消防安全帽1 個1 Fire Retardant Blanket 消防毯1 個Equipment will be ready installed in closed GRP boxes.所有設備放置于封閉的 GRP制作的箱子里。1.2.6 系留設施 TIE-DOWN SYSTEMSCCS TYPE APPROVAL在 搖角-15o.1/3+15 o、縱搖角 - 4o. 1/3+ 4 o，風速小于 25m/s 的情況下，保障在起

33、降平臺上安全系留直升機During the condition of ship transversal swing angle -15o.1/3+15 o、longitude swing angle - 4o. 1/3+ 4 o, wind speed is no less than 25m/s, to guarantee tie-down the helicopter on the helideck safety.A系留索具 Tie-down fittings 用于直升機起降平臺系留。Used for helicopter takeoff and touchdown helideck tie

34、-down function.主要性能：Main Characteristic:采用快速卸扣接頭、花籃螺絲和鏈條組合結構，總長度為 6m（0300mm 可調）。索具承載能力能滿足SIKORSKY S61、S92N 型直升機的系留要求，系留索具使用載荷為25kN，驗證載荷為 35kN(在此條件下沒有出現塑性變形)，系留索具破斷載荷45Kn。Fast shackle, turn buckle and chain combination, 6 meter length adjustable within 0-300mm. The loading capacity can meet SIKORSKY

35、S61 & S92N helicopter tie-down requirement, attached with fast tie-down connection accessories, divided into forward tie-down fittings, afterward tie-down fittings and chains three(3) parts. Operation load is 25Kn and test load is 35kN(without any distortion), break load capacity will be more th

36、an 45kN.主要參數及規格：Physical Characteristic:系留索具 8 套/船，材質為普通碳鋼每套配有：鏈條：10x 30-4746mm，數量 1 根； 鏈條卸扣： HDH10，數量 2 只；花籃螺絲： MKUUD7/8*12，數量 2 只。Size and Quantity total 8 sets/ship, steel each consist of Chain: 10x 30-4746mm, 1 pc/setShackle: HDH10, 2 pcs/setTurn buckle: MKUUD7/8*12, 2 pcs/setB系留座 Tie-down point

37、s 作為船上固定點用于直升機起降平臺系留Recess type, as fix points on the vessel to help helicopter takeoff and touchdown helideck.主要性能：Main characteristic:拉環不銹鋼材料。系留座抗拉力大于 2.5 噸，每只系留座配備橡膠材料的防水蓋一只。The points will be recess style, ring-pull stainless material.tie-down points tension will be large than 2.5tons. The point

38、s equip with one rubber seal cover for every tie-down point.數量：Quantity系留座： 18 個/船系留座防水蓋：18 個/船18 pcs/ship, with 18 rubber seal cover1.2.7助降燈光系統 NIGHT LIGHTING SYSTEMABS TYPE APPROVAL.主要功能 Main Function以確保直升機在夜間天氣良好的情況下起飛和降落To guarantee the helicopter takeoff and touchdown at night with visible weat

39、her condition夜間照明系統的配置根據 ABS 退審圖最終確定Night lighting system configuration will be final decided according the ABSapproved drawing.B. 照明燈具 Light Fixture照明箱 Lighting PanelM:1 SET電源 Power Supply:一路來自交流 220 伏，另一路來自 UPS. (UPS 由賣家供)2 power input: One AC220V from MSB, and one AC220V from UPS(UPS will be supp

40、lied by maker)邊界燈：LED 光源Perimeter Lights: LED green omnl directional 30cd Helideck Perimeter light for safe area in acid stainless steel c/w polycarbonate globe, instant ignition at all temperature resistant to vibrations c/w M25 cable gland and stopping plug. 220VAC, 50Hz, Max 10W. IP66. Compliance

41、 with ICAO and CAP 437.Total 25sets.泛光燈：提供邊界照明Flood Lights: XENON Helideck Floodlight, 240V, 60Hz, in acid proof stainless steel, IP66, suitable for use in safe area. Max 50W. Compliance with ICAO and CAP 437.Total: 4 sets風向標: 幫助直升機駕駛員指示風向 （帶安裝基座）Illuminated windsock: （with mounting base）:1 x Windso

42、ck(orange), length 2.40m, withluminary, for safe area. 220VAC, 50Hz, Max 100W. Hat in acid proof steel (316L). Bearing house in solid brass. Compliance with ICAO and CAP 437.Total: 1 set航空 燈： 遠距離目視引導直升機降落Obstacle Lights: Red 10cd obstacle light for safe area in acid stainless steel c/w polycarbonate

43、 globe, instant ignition at all temperature resistant to vibrations c/w M25 cable gland and stopping plug. 220VAC, 50Hz, 18W. IP66. Compliance with ICAO and CAP 437.Total: 1 set航空狀態燈：提供直升機起降狀態The Status Light system consists of one or two PFB flashing red LED main status lights visible from any dire

44、ction of approach and on any landing heading. Additional PRL-LSM repeater lights may be placed at the helideck. If a condition exists on an installation which may be hazardous for the helicopter or its occupants a visual warning system should be installed. The aeronautical meaning of the flashing re

45、d light is either Do not land, aerodrome not available for landing or Move clear of landing area. IP66. Compliance with ICAO and CAP 437.Total: 1 set1.2.8 SAFETY NET 安全網Surround the heli-deck. To guarantee the service crews safety on the heli-deck.環繞直升機平臺，主要用于保障在起降平臺作業時的安全A.Main Characteristic 主要性能S

46、tyle：The safety net is to be of manually dismountable type, around the platform.Iron frames, and the material of net will be non-flammable material.形式：可收放式結構，手動，并沿著直升機甲板邊緣?？蚣懿牧蠟殇X質， 網的材料為阻燃材料。Loading capacity：450kg;承重負荷：450 公斤Dynamic load: 150kg(1 meter far)動負荷：150 公斤（一米處）B. The altitude of safety ne

47、t will be 1.5m extend to the edge of helideck, total area will be: 80x1.5 = 120 sq. meter.主要參數及規格：安全網離直升機平臺邊緣距離 1.5 米，總面積將為： 80x1.5= 120 平方米。1.2.9LANDING NET 防滑網20mm diameter sisal rope, with agrid size of 200mm, secured every 1.5m the loading area, and tensioned toat least 2225N. Marking in contras

48、ting colors.防滑網由直徑 20mm，破斷拉力不小于 2,225N 的劍麻繩索組成，網格最大為 200mm，防滑網每隔 1.5m 與平臺相連接。并具有鮮明的識別顏色。Main data 主要參數及規格： 設 15m x 15m 的防滑網。Overall Size: 15m x 15m1.2.10HELIDECK MONITORING SYSTEM 直升機甲板品牌 Brand： SMC產地 Original:SWEDEN系統According to relevant rules : UK 、CAA 、CAP437 （2013）Including:1 ofHMS softwareHeli

49、deck Monitoring System software interfacing,Anemometer, Barometric Pressure (QNH, QFE),Air Temperature, compass,Ceilometer, Visibility, Present weather.Compliant with CAP437and the Norwegian Helideck Standards, Includes remote web client interfaceLocation：soft in PCHumidity,Motion Sensor, GPS,Gyro1

50、ofOperator Station (PC)Type: Shoreconnection HMS c/w Software/ Data logging/ Recording and Playback 12 months 19” LCD with mariner desk mount kit and compact cherry keyboard.Located in Radio Room or control room1 of Interface & Junction boxComputer, Power distribution, signal interfaces, and ter

51、minals1 of Motion SensorRoll, Pitch, Heave, Surge, Sway and Yaw. Location:out door ,under helideck.1 of Air- Temperature, -Humidity and Double Air Pressure (MET Sensor)Type: Vaisala PTU 300/303 c/w factory calibrationLocation :Top of navigation bridge/Radio room.1 of Static Pressure HeadLocation :To

52、p of mast1 of Radiation Shield with Mounting kitLocation :Top of mast1 of Wind Speed and Direction Sensor. Located in top of DerrickNote: Signal will be supplied by Shipyard1 of Cloud ceilometerincluding Sun shutter, Stand for cloud ceilometer,Demodulator BE 238A between Cloud ceilometer and PC (FSK

53、 - RS232), Blower(for better cloud detection at precipitation)Location :Top of navigation bridge/Radio room1 of Visibility SensorPresent Weather and Visibility Sensor 0-32000 m, Location :Top of mast1.2.11 Non-Directional Beacon(NDB) 航空信標機品牌 Brand： Nautel / VR125S產地 Original:Comprising:/Canada1）鞭狀天線

54、 Whip Antenna X 12）125 瓦主機 NDB Equipment (125W),3) 天調和發射單元 ATU and Dual Transmitter X 14）單元 Remote Control Unit X 15) 標準備件 Standard spare parts X 16). 同軸電纜 Coaxial cable 30m X 11.2.12 直升機通訊系統 Communication system1). 一套安裝的航空電臺 A110One (1) Panel / console mounted air band transceiver A110品牌 Brand： ICO

55、M產地 Original:組成 Comprising:Japan1).2).3).4).5).6).主機 Main unit X 1電源 Power supply X 1天線 Antenna X 1同軸電纜 Coaxial cable 30m X 1支架 Flush bracket X 1操作說明書 Instruction manual X12). 兩套便攜式航空對講機（大范圍） A24Two (2) Portable air band transceivers （Large scale） A24:品牌 Brand： ICOM產地 Original:組成 Comprising:Japan1).

56、2).3).4).5).主機帶天線 Main unit with antenna X 1電池 Battery unit X 1充電器 Battery charger耳機帶麥克風 Ear defending headsets with boom microphone X 1操作說明書 Instruction manual X 11.2.13 Supervisor賣方派人指導Seller should serve 3 times (30 working days). For installation supervision & commissioning for whole package (Each vessel). 制造廠應提供 3 次（共 30 工作日）的安裝監督及調試服務（每條船）。1.2.14 Test & commissioningFollow guidance of general requirement of builder furnish equipment. The commissioning procedure shall be provide.1.2.15 Assembly at Yard船廠裝配The assembly