UG軟件二次開發課程第四課

1、1函數的含義？函數的含義？n可以通過查詢可以通過查詢UG/Open API的函的函數時獲得數時獲得。2UF_MODL_create_block1 Creates a block. The Corner Point indicates the origin of the block to be created. The X, Y and Z lengths control the size of the edge lengths. The sign parameter controls the boolean operation performed. The output of this fun

2、ction is the object identifier associated to the block. The origin point is with respect to the Absolute CSYS. However, the direction of the edge lengths are with respect to the WCS.34extern int UF_MODL_create_block1 (UF_FEATURE_SIGN sign, extern int UF_MODL_create_block1 (UF_FEATURE_SIGN sign, doub

3、le corner_pt3, char double corner_pt3, char * * edge_len3, tag_t edge_len3, tag_t * * blk_obj_id ); blk_obj_id );UF_FEATURE_SIGN signInput The sign of the operation to be performed.UF_NULLSIGN = create new target solidUF_POSITIVE = add to target solidUF_NEGATIVE = subtract from target solidUF_UNSIGN

4、ED = intersect with target soliddouble corner_pt3 Input Corner point (origin) of blockchar * edge_len 3 Input Three edge lengths of blocktag_t * blk_obj_idOutputFeature object identifier of created block.5注注 意！意！n在在UG/OPEN API的功能函數中用到的描述實的功能函數中用到的描述實體的幾何特性值的變量是體的幾何特性值的變量是字符型字符型（char）的數的數據，而不是我們通常習慣使

5、用的據，而不是我們通常習慣使用的實型數據實型數據（double）。）。 如如: :本例中本例中block的的長、寬、高長、寬、高的表示即用的表示即用char *block_len3 = 1,2,3來說來說明。明。 6應用舉例應用舉例 n線性陣列（線性陣列（line instance）和和環形陣列環形陣列（Circular instance） 7線性陣列線性陣列n線性陣列線性陣列指一個特指一個特征在一個實體上按給定征在一個實體上按給定距離和方向進行行和列距離和方向進行行和列復制多個，最后結果象復制多個，最后結果象一個矩陣一樣排列。一個矩陣一樣排列。 8環形陣列環形陣列n環形陣列環形陣列 指一個特

6、指一個特征在一個實體上按給征在一個實體上按給定半徑和角度復制多定半徑和角度復制多個，最后結果成環形個，最后結果成環形排列。排列。 9任任 務務n在在block（長方體）或長方體）或cylinder（圓柱體）圓柱體）上進行槽或孔的線性陣列。上進行槽或孔的線性陣列。 10需要的功能函數需要的功能函數n UF_MODL_create_block1生成實體生成實體blockn UF_MODL_create_cyl1 生成實體生成實體cylindern UF_MODL_create_list 生成實體鏈表（被陣生成實體鏈表（被陣 列的實體必須進入鏈表）列的實體必須進入鏈表）n UF_MODL_put_l

7、ist_item把實體把實體ID號加入號加入鏈表尾鏈表尾n UF_MODL_create_linear_iset 完成線性陣列完成線性陣列11功能函數說明功能函數說明 nUF_MODL_create_cyl1 Creates a cylinder. The origin indicates where the center of the bottom face is located for the cylinder. The direction vector controls the axis on which the cylinder is created. The diameter and

8、 height control the size of the cylinder. The sign parameter controls the boolean operation performed. The output of this function is the object identifier associated to the cylinder. 1213功能函數說明功能函數說明nextern int extern int UF_MODL_create_cyl1UF_MODL_create_cyl1 ( (UF_FEATURE_SIGN sign, UF_FEATURE_SI

9、GN sign, double origin 3 , double origin 3 , char char * * height, height, char char * * diam, diam, double direction 3 , double direction 3 , tag_t tag_t * * cyl_obj_id ); cyl_obj_id ); 14功能函數說明功能函數說明nUF_MODL_create_list Creates a linked list of objects. A list of objects may contain identifiers fo

10、r bodies, features, faces and edges. You use this routine to create a list for those modeling routines that require a list as an input; please do not use this for ask routines that return lists. 15功能函數說明功能函數說明n extern int extern int UF_MODL_create_listUF_MODL_create_list ( ( uf_list_p_t uf_list_p_t

11、* * list ); list );uf_list_p_t * list Output List of object identifiers16功能函數說明功能函數說明nUF_MODL_put_list_item Adds the input object identifier Adds the input object identifier to the end of the list that you to the end of the list that you input.input. NOTE: Duplicate tags added to the list are ignore

12、d. 17功能函數說明功能函數說明nextern int extern int UF_MODL_put_list_itemUF_MODL_put_list_item ( (uf_list_p_t list, uf_list_p_t list, tag_t obj_id );tag_t obj_id );uf_list_p_t list Input List of object identifiers. tag_t obj_idInput Object identifier to put into list 18功能函數說明功能函數說明nUF_MODL_create_linear_iset Cr

13、eates a linear instance set feature using the existing work coordinate system. The values needed are the number in the XC direction, spacing for the XC direction, number in the YC direction, spacing in the YC direction, and a list of features to instance. The output of this function is the object id

14、entifier associated to the linear instance set. The method options correspond to what is available interactively. See the Modeling User Manual for details. 19功能函數說明功能函數說明extern intextern int UF_MODL_create_linear_isetUF_MODL_create_linear_iset ( (int method,int method, char char * * number_in_x, num

15、ber_in_x, char char * * distance_x, distance_x, char char * * number_in_y, number_in_y, char char * * distance_y, distance_y, uf_list_p_t feature_list, uf_list_p_t feature_list, tag_t tag_t * * feature_obj_id ); feature_obj_id ); 20int method InputMethod:0 = General1 = Simple2 = Identical21實實 例例n編制孔

16、在編制孔在block上進行實體線性陣列的程上進行實體線性陣列的程序代碼（假設建立的工程名稱為序代碼（假設建立的工程名稱為blk） 22步步 驟驟 n生成一個生成一個長方體長方體block，它的尺寸、位置它的尺寸、位置可任意給定可任意給定n生成一個圓柱體生成一個圓柱體cylinder，讓它與已生成讓它與已生成的的block進行布爾進行布爾減減運算（運算（boolean subtract ），），得到一個有孔的復合體。得到一個有孔的復合體。n實現在復合體中圓柱孔在長方體中的線性實現在復合體中圓柱孔在長方體中的線性陣列（陣列（line instance），），陣列方向、距陣列方向、距離、位置可以任意

17、給定。離、位置可以任意給定。23建立框架建立框架n程序的宏聲明程序及與程序的宏聲明程序及與UG的入口函數、的入口函數、卸除函數均可從卸除函數均可從UG的例程中拷貝獲得。的例程中拷貝獲得。24實實 現現n建立新工程，例如建立新工程，例如Blk并設置工程環境并設置工程環境。n利用利用VC中的中的FileNew建立一個新建立一個新的的 .CPP文件。文件。n輸入程序代碼輸入程序代碼n編譯、聯編后，生成動態鏈接庫編譯、聯編后，生成動態鏈接庫blk.dll。25static void do_ugopen_api(float abc ,float orig1 ,float orig2 ) int meth

18、od=0; /Method:0 = General,1 = Simple,2 = Identical; double block_orig3 = orig10,orig11,orig12; double cyl_orig3=orig20,orig21,orig22; char *block_len3; char bb420; char *cyl_height; char *cyl_diam; char cc320; double direction3=0,0,1; char *number_in_x ; char *distance_x ; char *number_in_y ; char *

19、distance_y ; char dd520; tag_t blk_obj ; tag_t cyl_obj_id; uf_list_p_t feature_list ; tag_t feature_obj_id; 變量申明變量申明 float_to_char(abc0,bb0); block_len0=bb0; float_to_char(abc1,bb1); block_len1=bb1; float_to_char(abc2,bb2); block_len2=bb2; UF_CALL(UF_MODL_create_block1(sign, block_orig, block_len, &

20、blk_obj); float_to_char(abc3,cc0); cyl_height=cc0; float_to_char(abc4,cc1); cyl_diam=cc1; UF_CALL(UF_MODL_create_cyl1(sign1, cyl_orig, cyl_height, cyl_diam,direction, &cyl_obj_id);27 float_to_char(abc5,dd0 ); number_in_x =dd0; float_to_char(abc6,dd1); distance_x = dd1; float_to_char(abc7,dd2); numbe

21、r_in_y = dd2; float_to_char(abc8,dd3); distance_y =dd3; UF_CALL(UF_MODL_create_list(&feature_list); UF_CALL(UF_MODL_put_list_item(feature_list,cyl_obj_id); UF_CALL(UF_MODL_create_linear_iset ( method, number_in_x, distance_x, number_in_y, distance_y, feature_list, &feature_obj_id ); return; 28void m

22、ain( ) float abc9=5.0,4.0,3.0,4.0,0.5,3.0,1.5,2.0,1.5;/長方體和圓柱體的尺寸參數長方體和圓柱體的尺寸參數 blX blY blZ cylH cylD 陣列參數陣列參數X XL Y YL float orig13=0.0,0.0,0.0; /長方體的原點長方體的原點float orig23=1.0,1.0,0.0; /圓柱體的原點圓柱體的原點do_ugopen_api(abc,orig1,orig2);29運行結果運行結果30作業一、作業一、完成球體打孔完成球體打孔尺寸：尺寸：sphere（直徑）（直徑） =（100） cylinder（直徑，高度）