ZigBee協議棧初始化網絡啟動流程

1、ZigBee協議棧初始化網絡啟動流程編制僅供參考審核批準生效日期地址： 電話：傳真: 郵編:ZigBee協議棧初始化網絡啟動流程ZigBee的基本流程：由協調器的組網（創建PAN ID），終端設備和路由設備發現網絡以及加入網絡?；玖鞒蹋簃ain()-osal_init_system()-osalInitTasks()-ZDApp_Init()，進協議棧初始化函數ZDApp_Init()。1.1 進入程序入口main()。ZMain.c中C+ Codeint main( void )/ Turn off interruptsosal_int_disable( INTS_ALL );/ Init

2、ialization for board related stuff such as LEDsHAL_BOARD_INIT();/ Make sure supply voltage is high enough to runzmain_vdd_check();/ Initialize board I/OInitBoard( OB_COLD );/ Initialze HAL driversHalDriverInit();/ Initialize NV Systemosal_nv_init( NULL );/ Initialize the MACZMacInit();/ Determine th

3、e extended addresszmain_ext_addr();/ Initialize basic NV itemszgInit();#ifndef NONWK/ Since the AF isnt a task, call its initialization routineafInit();#endif/ Initialize the operating systemosal_init_system();/ Allow interruptsosal_int_enable( INTS_ALL );/ Final board initializationInitBoard( OB_RE

4、ADY );/ Display information about this devicezmain_dev_info();/* Display the device info on the LCD */#ifdef LCD_SUPPORTEDzmain_lcd_init();#endif#ifdef WDT_IN_PM1/* If WDT is used, this is a good place to enable it. */WatchDogEnable( WDTIMX );#endifosal_start_system(); / No Return from herereturn 0;

5、 / Shouldnt get here. / main()1.2 給任務添加IDsapi.c中C+ Codevoid osalInitTasks( void ) /為各自進程添加ID 用于任務的查找uint8 taskID = 0;tasksEvents = (uint16 *)osal_mem_alloc( sizeof( uint16 ) * tasksCnt);osal_memset( tasksEvents, 0, (sizeof( uint16 ) * tasksCnt);macTaskInit( taskID+ );nwk_init( taskID+ );Hal_Init( ta

6、skID+ );/硬件抽象層初始化#if defined( MT_TASK )MT_TaskInit( taskID+ );#endifAPS_Init( taskID+ );ZDApp_Init( taskID+ );/判斷如果協調器節點建立網絡、如果終端節點加入網絡SAPI_Init( taskID );1.3 初始化ZigBee協議棧網絡ZDApp.cC+ Codevoid ZDApp_Init( uint8 task_id )/ Save the task IDZDAppTaskID = task_id;/ Initialize the ZDO global device short

7、address storageZDAppNwkAddr.addrMode = Addr16Bit;ZDAppNwkAddr.addr.shortAddr = INVALID_NODE_ADDR;(void)NLME_GetExtAddr(); / Load the saveExtAddr pointer./ Check for manual Hold Auto Start/檢測到有手工設置HAL_KEY_SW_1則會設置devState = DEV_HOLD,從而避開網絡初始化ZDAppCheckForHoldKey();/ Initialize ZDO items and setup the

8、 device - type of device to create.ZDO_Init(); /通過判斷預編譯來開啟一些函數功能/ Register the endpoint description with the AF/ This task doesnt have a Simple description, but we still need/ to register the endpoint.afRegister( (endPointDesc_t *)&ZDApp_epDesc );#if defined( ZDO_USERDESC_RESPONSE )ZDApp_InitUserDes

9、c();#endif / ZDO_USERDESC_RESPONSE/ Start the device?if ( devState != DEV_HOLD )ZDOInitDevice( 0 );else/ Blink LED to indicate HOLD_STARTHalLedBlink ( HAL_LED_4, 0, 50, 500 );ZDApp_RegisterCBs(); /* ZDApp_Init() */如果設置devState為DEV_HOLD，則不會執行ZDOInitDevice；反之，系統會調用此函數是設備組網或者入網?？聪逻@個函數完成的功能是什么樣子的。ZDOIni

10、tDevice是設備在網絡中啟動。它會讀取NV中的ZCD_NV_STARTUP_OPTION選項決定是否恢復網絡狀態。如果應用層強制進行新的join操作，它應該在調用這個函數之前設置ZCD_NV_STARTUP_OPTION中的ZCD_STARTOPT_DEFAULT_NETWORK_STATE位?？梢哉{(diào)用zgWrieStartupOptions()函數完成這些設置。1.4 初始化設備（啟動網絡和設置網絡類型）ZDApp.cC+ Codeuint8 ZDOInitDevice( uint16 startDelay )uint8 networkStateNV = ZDO_INITDEV_NEW_

11、NETWORK_STATE;uint16 extendedDelay = 0;if ( devState = DEV_HOLD )/ Initialize the RAM items table, in case an NV item has been updated.zgInitItems( FALSE );ZDConfig_InitDescriptors();/devtag.071807.todo - fix this temporary solution_NIB.CapabilityInfo = ZDO_Config_Node_Descriptor.CapabilityFlags;dev

12、State = DEV_INIT; / Remove the Hold state/ 函數讀取NV項目ZCD_NV_LEAVE_CTRL的值,ZDApp_LeaveCtrl指向這個值/ Initialize leave control logicZDApp_LeaveCtrlInit();/ Check leave control reset settings/設備的斷開會造成DEV_HOLD狀態ZDApp_LeaveCtrlStartup( &devState, &startDelay );/ Leave may make the hold state come backif ( devSt

13、ate = DEV_HOLD )/設置啟動選項/ Set the NV startup option to force a new join.zgWriteStartupOptions( ZG_STARTUP_SET, ZCD_STARTOPT_DEFAULT_NETWORK_STATE );/通知應用層觸發事件/ Notify the applicationsosal_set_event( ZDAppTaskID, ZDO_STATE_CHANGE_EVT );return ( ZDO_INITDEV_LEAVE_NOT_STARTED ); / Dont join - (one time)

14、.#if defined ( NV_RESTORE )/ Get Keypad directly to see if a reset nv is needed./ Hold down the SW_BYPASS_NV key (defined in OnBoard.h)/ while booting to skip past NV Restore.if ( HalKeyRead() = SW_BYPASS_NV )networkStateNV = ZDO_INITDEV_NEW_NETWORK_STATE;else/ 通過讀取ZCD_NV_STARTUP_OPTION選項決定是否進行網絡恢復/

15、 Determine if NV should be restorednetworkStateNV = ZDApp_ReadNetworkRestoreState();if ( networkStateNV = ZDO_INITDEV_RESTORED_NETWORK_STATE )networkStateNV = ZDApp_RestoreNetworkState();else/ Wipe out the network state in NVNLME_InitNV();NLME_SetDefaultNV();#endifif ( networkStateNV = ZDO_INITDEV_N

16、EW_NETWORK_STATE )/如果是要啟動新的網絡ZDAppDetermineDeviceType();/根據選項設置設備的網絡類型，默認路由類型/ Only delay if joining network - not restoring network stateextendedDelay = (uint16)(NWK_START_DELAY + startDelay)+ (osal_rand() & EXTENDED_JOINING_RANDOM_MASK);/ Initialize the security for type of deviceZDApp_SecInit( ne

17、tworkStateNV );/ 觸發啟動網絡/ Trigger the network startZDApp_NetworkInit( extendedDelay );/ set broadcast address mask to support broadcast filtering 用于處理合法的廣播地址NLME_SetBroadcastFilter( ZDO_Config_Node_Descriptor.CapabilityFlags );return ( networkStateNV );這個函數注意功能：初始化設備配置，ZDAppDetermineDeviceType()設置網絡類

18、型（協調、路由、終端），ZDApp_NetworkInit( extendedDelay )初始化網絡并開啟或加入網絡。1.5 定時開啟網絡ZDApp.c進入ZDApp_NetworkInit()函數，等待一段時間在執行ZDO_NETWORK_INIT，跳入事件處理ZDApp層ZDAPP_EVENT_LOOP()函數開啟網絡。C+ Codevoid ZDApp_NetworkInit( uint16 delay )if ( delay )/ Wait awhile before starting the deviceosal_start_timerEx( ZDAppTaskID, ZDO_NE

19、TWORK_INIT, delay );/發送ZDO_NETWORK_INIT（網絡初始化）消息到 ZDApp層，轉到ZDApp層，ZDApp_event_loop()函數。elseosal_set_event( ZDAppTaskID, ZDO_NETWORK_INIT );1.6 啟動設備ZDApp.cZDApp_event_loop()函數是回調函數，循環處理主事件。設備邏輯類型，啟動模式，信標時間，超幀長度C+ CodeUINT16 ZDApp_event_loop( uint8 task_id, UINT16 events )uint8 *msg_ptr;if ( events &

20、SYS_EVENT_MSG )while ( (msg_ptr = osal_msg_receive( ZDAppTaskID ) )ZDApp_ProcessOSALMsg( (osal_event_hdr_t *)msg_ptr );/ Release the memoryosal_msg_deallocate( msg_ptr );/ Return unprocessed eventsreturn (events SYS_EVENT_MSG);if ( events & ZDO_NETWORK_INIT )/ Initialize apps and start the networkde

21、vState = DEV_INIT;/設備邏輯類型，啟動模式，信標時間，超幀長度，接著轉到去啟動設備,轉到ZDO_StartDevice()ZDO_StartDevice( (uint8)ZDO_Config_Node_Descriptor.LogicalType, devStartMode,DEFAULT_BEACON_ORDER, DEFAULT_SUPERFRAME_ORDER );/ Return unprocessed eventsreturn (events ZDO_NETWORK_INIT);if ( ZSTACK_ROUTER_BUILD )if ( events & ZDO_

22、NETWORK_START )ZDApp_NetworkStartEvt();/ Return unprocessed eventsreturn (events ZDO_NETWORK_START);if ( events & ZDO_ROUTER_START )if ( nwkStatus = ZSuccess )if ( devState = DEV_END_DEVICE )devState = DEV_ROUTER;osal_pwrmgr_device( PWRMGR_ALWAYS_ON );else/ remain as end device!osal_set_event( ZDApp

23、TaskID, ZDO_STATE_CHANGE_EVT );/ Return unprocessed eventsreturn (events ZDO_ROUTER_START);if ( events & ZDO_STATE_CHANGE_EVT )ZDO_UpdateNwkStatus( devState );/ At start up, do one MTO route discovery if the device is a concentratorif ( zgConcentratorEnable = TRUE )/ Start next eventosal_start_timer

24、Ex( NWK_TaskID, NWK_MTO_RTG_REQ_EVT, 100 );/ Return unprocessed eventsreturn (events ZDO_STATE_CHANGE_EVT);if ( events & ZDO_COMMAND_CNF )/ User defined logic/ Return unprocessed eventsreturn (events ZDO_COMMAND_CNF);if ( events & ZDO_NWK_UPDATE_NV )ZDApp_SaveNetworkStateEvt();/ Return unprocessed e

25、ventsreturn (events ZDO_NWK_UPDATE_NV);if ( events & ZDO_DEVICE_RESET )/ The device has been in the UNAUTH state, so reset/ Note: there will be no return from this callSystemReset();if ( ZG_SECURE_ENABLED )return ( ZDApp_ProcessSecEvent( task_id, events ) );else/ Discard or make more handlersreturn

26、0;1.7 開啟網絡ZDObject.cC+ Codevoid ZDO_StartDevice( byte logicalType, devStartModes_t startMode, byte beaconOrder, byte superframeOrder )ZStatus_t ret;#if defined ( ZIGBEE_FREQ_AGILITY )static uint8 discRetries = 0;#endif#if defined ( ZIGBEE_COMMISSIONING )static uint8 scanCnt = 0;#endifret = ZUnsuppor

27、tedMode;if ( ZG_BUILD_COORDINATOR_TYPE & logicalType = NODETYPE_COORDINATOR ) /當設備作為協調器時，執行這個條件語句。if ( startMode = MODE_HARD )devState = DEV_COORD_STARTING;/向網絡層發送網絡形成請求。當網絡層執行 NLME_NetworkFormationRequest（）建立網絡后，將給予ZDO層反饋信息。/ 接著轉去執行ZDApp層的 ZDO_NetworkFormationConfirmCB（）函數ret = NLME_NetworkFormatio

28、nRequest( zgConfigPANID, zgApsUseExtendedPANID, zgDefaultChannelList,zgDefaultStartingScanDuration, beaconOrder,superframeOrder, false );else if ( startMode = MODE_RESUME )/ Just start the coordinatordevState = DEV_COORD_STARTING;ret = NLME_StartRouterRequest( beaconOrder, beaconOrder, false );else#

29、if defined( LCD_SUPPORTED )HalLcdWriteScreen( StartDevice ERR, MODE unknown );#endifif ( ZG_BUILD_JOINING_TYPE & (logicalType = NODETYPE_ROUTER | logicalType = NODETYPE_DEVICE) )/當設備作為節點時，執行這個條件語句。if ( (startMode = MODE_JOIN) | (startMode = MODE_REJOIN) )devState = DEV_NWK_DISC;#if defined( MANAGED_

30、SCAN )ZDOManagedScan_Next();ret = NLME_NetworkDiscoveryRequest( managedScanChannelMask, BEACON_ORDER_15_MSEC );#elseret = NLME_NetworkDiscoveryRequest( zgDefaultChannelList, zgDefaultStartingScanDuration );#if defined ( ZIGBEE_FREQ_AGILITY )if ( !( ZDO_Config_Node_Descriptor.CapabilityFlags & CAPINF

31、O_RCVR_ON_IDLE ) &( ret = ZSuccess ) & ( +discRetries = 4 ) )/ For devices with RxOnWhenIdle equals to FALSE, any network channel/ change will not be recieved. On these devices or routers that have/ lost the network, an active scan shall be conducted on the Default/ Channel list using the extended P

32、ANID to find the network. If the/ extended PANID isnt found using the Default Channel list, an scan/ should be completed using all channels.zgDefaultChannelList = MAX_CHANNELS_24GHZ;#endif / ZIGBEE_FREQ_AGILITY#if defined ( ZIGBEE_COMMISSIONING )if (startMode = MODE_REJOIN & scanCnt+ = 5 )/ When Aps

33、UseExtendedPanID is commissioned to a non zero value via/ application specific means, the device shall conduct an active scan/ on the Default Channel list and join the PAN with the same/ ExtendedPanID. If the PAN is not found, an scan should be completed/ on all channels./ When devices rejoin the network and the PAN is not found fromzgDefaultChannelList = MAX_CHANNELS_24GHZ;#endif / ZIGBEE_COMMISSIONING#endifelse if ( startMode = MODE_RESUME )if ( logicalType = NODETYPE_ROUTER )ZMacScanCnf_t scan