標準解讀
《GB/T 27545-2024 水平循環類機械式停車設備》相較于《GB/T 27545-2011 水平循環類機械式停車設備》,在多個方面進行了更新和調整,以適應技術進步及市場需求的變化。主要變化包括但不限于以下幾點:
-
術語與定義:新版本對部分專業術語進行了修訂或新增,確保術語的準確性和一致性,有助于行業內溝通交流更加順暢。
-
安全要求:根據近年來出現的新技術和應用場景,《GB/T 27545-2024》加強了對設備安全性的規定,比如增加了關于電氣系統、控制系統以及緊急停止功能等方面的安全標準,提高了對人員保護的要求。
-
性能參數:新版標準可能針對水平循環類機械式停車設備的關鍵性能指標(如承載能力、運行速度等)進行了優化調整,使之更符合當前市場的需求和技術水平。
-
測試方法:為保證產品質量,《GB/T 27545-2024》可能引入了新的測試項目或者改進了原有的測試流程,旨在通過更加嚴格全面的檢驗來驗證產品是否滿足相關要求。
-
環境保護:隨著社會對環保意識的提升,新標準中也可能加入了更多關于節能減排方面的考量,鼓勵采用綠色材料和技術,減少設備使用過程中對環境的影響。
-
維護保養指南:為了延長設備使用壽命并保證其長期穩定運行,新版本可能會提供更為詳細具體的日常維護建議和故障排查指導。
以上變化反映了行業發展趨勢以及用戶需求的變化,體現了標準制定者對于提高產品質量、保障公共安全等方面的持續關注。
如需獲取更多詳盡信息,請直接參考下方經官方授權發布的權威標準文檔。
....
查看全部
- 即將實施
- 暫未開始實施
- 2024-09-29 頒布
- 2025-04-01 實施
文檔簡介
ICS53.020.99
CCSJ80
中華人民共和國國家標準
GB/T27545—2024
代替GB/T27545—2011
水平循環類機械式停車設備
Horizontalcirculatingmechanicalparkingsystem
2024?09?29發布2025?04?01實施
國家市場監督管理總局
國家標準化管理委員會發布
GB/T27545—2024
目次
前言··························································································································Ⅲ
1范圍·······················································································································1
2規范性引用文件········································································································1
3術語和定義··············································································································2
4型式、基本參數和型號································································································2
4.1型式·················································································································2
4.2基本參數···········································································································3
4.3型號·················································································································3
5技術要求·················································································································3
5.1使用環境條件·····································································································3
5.2設計及配置········································································································3
5.3整機性能···········································································································4
5.4制造·················································································································4
5.5安裝·················································································································5
5.6安全·················································································································6
5.7表面涂裝···········································································································7
6試驗方法·················································································································7
6.1試驗條件··········································································································7
6.2目測檢查···········································································································7
6.3單車最大進(出)車時間·························································································7
6.4空載試驗···········································································································7
6.5額定載荷試驗·····································································································7
6.6靜載試驗···········································································································8
6.7動載試驗···········································································································8
6.8起升速度和下降速度····························································································8
6.9額定運行速度·····································································································8
6.10電源缺相及錯相保護功能·····················································································8
6.11接地電阻的測定·································································································8
6.12絕緣電阻的測定·································································································8
6.13平層精度··········································································································9
6.14安全防護裝置試驗······························································································9
6.15噪聲··············································································································10
6.16漆膜附著力的測定····························································································10
Ⅰ
GB/T27545—2024
7檢驗規則···············································································································10
7.1檢驗分類··········································································································10
7.2出廠檢驗··········································································································10
7.3型式檢驗··········································································································10
8標志、包裝、運輸及貯存·····························································································12
8.1標志················································································································12
8.2包裝················································································································12
8.3運輸及貯存·······································································································12
參考文獻····················································································································13
Ⅱ
GB/T27545—2024
前言
本文件按照GB/T1.1—2020《標準化工作導則第1部分:標準化文件的結構和起草規則》的規
定起草。
本文件代替GB/T27545—2011《水平循環類機械式停車設備》,與GB/T27545—2011相比,除結
構調整和編輯性改動外,主要技術變化如下:
——增加了術語“水平循環類機械式停車設備”及其定義(見3.1);
——更改了停車設備的型式(見4.1,2011年版的4.1);
——更改了停車設備的型號表示方法(見4.3.1,2011年版的4.3);
——更改了停車設備的標記示例(見4.3.2,2011年版的4.4);
——更改了停車設備的相應使用環境下要求(見5.1,2011年版的5.1);
——更改了停車設備的設計及配置(見5.2,2011年版的5.2);
——更改了單車最大進(出)車時間和存容量(見5.2.3,2011年版的4.2.2);
——增加了整機性能要求(見5.3);
——更改了金屬結構主要受力結構件材料的力學性能要求(見5.4.1.1,2011年版的5.3.1.1);
——更改了焊縫要求及螺栓連接強度要求(見5.4.1.2、5.4.1.3,2011年版的5.3.1.2、5.3.1.3);
——更改了除銹要求規定等級(見5.4.1.4,2011年版的5.3.1.4);
——更改了制動器技術要求(見5.4.2.3,2011年版的5.3.2.3);
——更改了電氣設計要求(見5.4.3,2011年版的5.3.3);
——刪除了零部件的水平循環機構和升降機(見2011年版的5.3.2.5.1、5.3.2.5.4);
——增加了金屬結構的連接件要求(見5.5.1);
——更改了兩條運行軌道同一截面的高度差及直線度要求(見5.5.4,2011年版的5.4.5);
——刪除了運行的相關要求(見2011年版的5.5);
——增加了設備安全標志與危險圖示的要求(見5.6.2);
——增加了對于升降平臺升降到位后以及在轉換區轉換位置時,采取載車板平移方式交換汽車的
安全要求(見5.6.7);
——更改了表面涂裝(見5.7,2011年版的5.7);
——刪除了超載運行試驗(見2011年版的5.8);
——更改了試驗條件(見6.1,2011年版的6.1);
——更改了目測檢查方法(見6.2,2011年版的6.2);
——更改了單車最大進(出)車時間測定方法(見6.3,2011年版的6.3.4);
——更改了空載試驗(見6.4,2011年版的6.3.1);
——更改了額定載荷試驗(見6.5,2011年版的6.3.2);
——增加了靜載試驗(見6.6);
——更改了動載試驗(見6.7,2011年版的6.3.3);
——增加了起升速度和下降速度(見6.8);
——增加了額定運行速度(見6.9);
——刪除了驅動機構的制動系統功能(見2011年版的6.4.14);
——更改了電源缺相及錯相保護功能(見6.10,2011年版的6.4.15);
——增加了接地電阻的測定方法(見6.11);
Ⅲ
GB/T27545—2024
——增加了絕緣電阻的測定方法(見6.12);
——增加了平層精度的測定方法(見6.13);
——更改了升降機與水平循環機構的聯鎖功能(見6.14.14,2011年版的6.4.13);
——更改了檢驗項目(見表4,2011年版的表4);
——更改了標志、包裝、運輸及貯存的相關要求(見第8章,2011年版的第8章)。
請注意本文件的某些內容可能涉及專利。本文件的發布機構不承擔識別專利的責任。
本文件由中國機械工業聯合會提出。
本文件由全國起重機械標準化技術委員會(SAC/TC227)歸口。
本文件起草單位:江蘇普騰智能技術有限公司、北京起重運輸機械設計研究院有限公司、青島華通
石川島停車裝備有限責任公司、北京科正平工程技術檢測研究院有限公司、浙江鐳蒙科技有限公司、深
圳市偉創自動化設備有限公司、杭州大中泊奧科技股份有限公司、南京市特種設備安全監督檢驗研究
院、深圳中集智能停車有限公司、中建科工集團智慧停車科技有限公司、山東萊鋼泰達車庫有限公司、
青島齊星車庫有限公司、浙江諾力車庫設備制造有限公司、西安特種設備檢驗檢測院、安徽鴻杰威爾停
車設備有限公司、長治市長清科技有限公司、安徽凱旋智能停車設備有限公司、深圳市惠車智能科技有
限公司、上海華宸立體車庫集團有限公司、寧夏特種設備檢驗檢測院、浙江泊通智能設備有限公司。
本文件主要起草人:姚昕、王丹、沈林波、趙春暉、張冰帥、陶天華、孟晨燦、林偉通、吳艷爭、王會方、
謝蘭平、梁樂賢、蔣官業、秦圣祥、汪朝杰、馬立新、梁明、慕生勇、吳厚團、李琨、李欣、劉瑞、李和平、
舒子堅。
本文件及其所代替文件的歷次版本發布情況為:
——2011年首次發布為GB/T27545—2011;
——本次為第一次修訂。
Ⅳ
GB/T27545—2024
水平循環類機械式停車設備
1范圍
本文件規定了水平循環類機械式停車設備的術語和定義、型式、基本參數和型號、技術要求、試驗
方法、檢驗規則、標志、包裝、運輸及貯存。
本文件適用于GB/T26476中定義的水平循環類機械式停車設備。
2規范性引用文件
下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中,注日期的引用文
件,僅該日期對應的版本適用于本文件;不注日期的引用文件,其最新版本(包括所有的修改單)適用于
本文
溫馨提示
- 1. 本站所提供的標準文本僅供個人學習、研究之用,未經授權,嚴禁復制、發行、匯編、翻譯或網絡傳播等,侵權必究。
- 2. 本站所提供的標準均為PDF格式電子版文本(可閱讀打印),因數字商品的特殊性,一經售出,不提供退換貨服務。
- 3. 標準文檔要求電子版與印刷版保持一致,所以下載的文檔中可能包含空白頁,非文檔質量問題。
最新文檔
- 電機學課件-清華大學
- 2024年全新裝修設計合作協議2篇
- 廣西大學附屬中學消防講座課件張琳敏課件
- 房屋擔保租賃合同(2篇)
- 2024年互聯網租賃平臺自行車退租退款及押金返還協議3篇
- 2025年貴州貨運從業資格考試模擬考試題庫及答案解析
- 2025年福州貨運從業資格試題答案解析
- 2025年武漢貨運從業資格證考試模擬考試題及答案
- 2025年克拉瑪依b2考貨運資格證要多久
- 2025年塔城貨運資格證培訓考試題
- 事業單位面試題-人際關系類
- Linux配置與管理智慧樹知到期末考試答案2024年
- 防失智老人走失試理論試題及答案
- 腎活檢術后護理查房
- 血糖監測技術新進展培訓課件
- 《衛生檢疫》期末復習選擇題及答案
- 你那年那兔那些事兒
- 生活區公共服務設施布局規劃優化
- DB21-T 2780.1-2017遼東落葉松二元立木材積表 第1 部分 日本落葉松
- 地源熱泵施工流程課件
- 智能物料搬運機器人設計方案
評論
0/150
提交評論