



下載本文檔
版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
1、,START,3.0L V6D Customer reports excessive smoke from the exhaust,Dealer should try to reproduce the symptoms, record outcome on record sheet,Carry out a leak test of the induction system using a smoke test. Check for leaks from the exhaust system.,Were leaks detected ?,Trace the leaks use a spare o
2、il filler cap with a 6mm hole as a test tool and connect a Mityvac or pressure gauge.,YES,NO,Measure the engine manifold blow-by pressure at idle with the engine cold. Normally the pressure will be around atmospheric.,Using SDD, monitor the shut off valve measured position which should change after
3、3 minutes indicating that the secondary turbo is now operating. At this point measure blow-by pressure at idle. Blow by pressure will normally be around atmospheric.,Measure blow-by pressure at 3000 rpm. Normally the pressure gauge will now show a slight vacuum.,Remove pipe below scavenge tank, care
4、fully collect all oil that drains in 30 minutes (minimum).,A,C,Trace source of high blow-by; check for low compressions and breather restrictions,Switch off the engine and refit the original oil filler cap.,C,Remove the primary and secondary exhaust downpipes. If oil is present take pictures to atta
5、ch to TA report.,Check induction system for presence of oil. If oil is present take pictures to attach to TA report.,Check turbo intercooler warm engine, drive the car with SDD connected to monitor the secondary turbo. Hold the engine speed to around 3800 rpm for 10 minutes and check for visible smo
6、ke from the exhaust.,NO,Was more than 500ml of oil collected from the scavenge tank?,NO,YES,A,YES,Oil found from exhaust manifold?,YES,NO,NO,Drain the scavenge tank over night. Check whether smoke is produced when engine is started with an empty scavenge tank.,Check the scavenge pipes are not blocked / restricted,Was engine light on?,List all stored DTCs,Did oil level need topping up, or was there too much oil in engine?,Symptoms reproduced?,Customer complaint secondary turbo operating 3000 rpm,Excessive blow-by? Cause?,Millilitres (ml) of oil drained from scavenge tank?,TEST RESULTS
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 東營春季高考數學試卷
- 德城區1年級數學試卷
- 培訓課件要有什么內容
- 拱墅區四年級下數學試卷
- 二中廣雅初中數學試卷
- 骨科專業培訓課件
- 2025年04月河南南陽市社旗縣醫療健康服務集團招聘250人筆試歷年專業考點(難、易錯點)附帶答案詳解
- 適合提升培訓的課件
- 2025至2030磁控健身車產業市場深度調研及發展趨勢與發展趨勢分析與未來投資戰略咨詢研究報告
- 2025至2030船舶電子行業市場發展分析與發展前景及有效策略與實施路徑評估報告
- GB/T 42567.3-2023工業過程測量變送器試驗的參比條件和程序第3部分:溫度變送器的特定程序
- 2023年刑法學法律法規知識考試題庫(附含答案)
- 摩托羅拉SL1M產品介紹
- 企業資產評估工作底稿模版
- 潘志勇第三章-3節-2學時-園藝植物采后生物技術
- 2023浙江新高考學考考綱-考試標準數學(學考選考標準word版)
- GB/T 19042.5-2022醫用成像部門的評價及例行試驗第3-5部分:X射線計算機體層攝影設備成像性能驗收試驗與穩定性試驗
- YY/T 0964-2014外科植入物生物玻璃和玻璃陶瓷材料
- GB/T 5193-2020鈦及鈦合金加工產品超聲檢驗方法
- GB/T 18838.3-2008涂覆涂料前鋼材表面處理噴射清理用金屬磨料的技術要求第3部分:高碳鑄鋼丸和砂
- GB/T 18776-2002公差尺寸英寸和毫米的互換算
評論
0/150
提交評論