蜂鳴器911報警

1、蜂鳴器911報警-定時計數器實驗/*/  911報警聲音                                            

2、60;      */*                    設置，將蜂鳴器旁邊的跳線跳上，下載程序到實驗班，會聽到急促的報警聲       */            /*/ 

3、                                   #include <reg51.h>#include <intrins.h>sbit SPK = P37;unsigned char frq; void delaym

4、s(unsigned char ms);main() TMOD = 0x01; frq = 0x00; TH0 = 0x00; TL0 = 0xff;  TR0 = 1; IE = 0x82;  while(1)   frq+;  delayms(1); void timer0() interrupt 1 using 1 TH0 = 0xfe; TL0 = frq; SPK = SPK; void dela

5、yms(unsigned char ms) / 延時子程序       unsigned char i; while(ms-)   for(i = 0; i < 120; i+); 看程序應該是發出的聲音頻率越來越高，然后突然降低，再越來越高，如此循環main() TMOD = 0x01; /設定時方式1，16位定時器 frq = 0x00; TH0 = 0x00; /賦初值 TL0 = 0xff; /賦初值 TR0 = 1; /開始計數 IE = 0x82;

6、 /允許中斷 while(1) frq+; /每個毫秒增加頻率，直至frq=0，頻率下降，如此循環 delayms(1); void timer0() interrupt 1 using 1 TH0 = 0xfe; TL0 = frq; /根據frq改變定時器的值 SPK = SPK; /發出占空比50%的音頻#include<reg52.h>#define uint unsigned int#define uchar unsigned charsbit d=P23;uint aa;void delay(uint z);void xulei();void main() xulei(

7、); while(1) P1=0xfe; d=!d; delay(1); void delay(uint z) uint x,y; for(x=z;x>0;x-) for(y=110;y>0;y-);void xulei() aa=0; TMOD=0x01; TH0=(65536-50000)/256; TL0=(65536-50000)%256; EA=1; ET0=1; TR0=1;void zhongduan() interrupt 1 TH0=(65536-50000)/256; TL0=(65536-50000)%256; aa+; if(aa=10) aa=0; P1=

8、0xff; delay(500); /*頭文件區*#include<reg52.h>#include<math.h>#include<absacc.h>#include<intrins.h>/*宏定義方便使用*#define uchar unsigned char#define uint unsigned int/*定義變量區*sbit dula=P26; /數碼管段選sbit wela=P27; /數碼管位選sbit lcden=P34; /LCD使能信號sbit lcdrs=P35; /LCD數據/命令選擇信號uchar code tab_n

9、ie="Nie Jinbo"uchar code tab_index=""/*函數聲明區*void lcd_dis(); /lcd顯示函數void lcd_init(); /LCD初始化函數void write_com(uchar); /寫命令函數void write_data(uchar); /寫數據函數void delay(uint); /延時函數/*主函數開始*void main()lcd_dis();while(1); /*lcd顯示函數開始*void lcd_dis()uchar n; lcd_init();write_com(1);write

10、_com(0x80+4); /設置光標位置for(n=0;n<9;n+)write_data(tab_nien);delay(2);write_com(0x80+0x40); / 設置光標位置for(n=0;n<15;n+)write_data(tab_indexn);delay(2);/*LCD初始化函數開始*void lcd_init()dula=0;wela=0; / 關閉數碼管顯示lcden=0;write_com(0x38); /設置顯示模式:16X2,5X7,8位數據接口write_com(0x0f); /開顯示,顯示光標,光標閃爍write_com(0x06); /讀

11、寫一個字符后,地址指針及光標加一,且光標加一整屏顯示不移動write_com(0x80); /設置光標指針/*寫命令函數開始*void write_com(uchar com)lcdrs=0; /低電平寫命令P0=com; /寫入命令delay(3); /延時約3mslcden=1; /LCD使能端置高電平delay(5); /延時約5mslcden=0; /LCD使能端拉低電平/*寫數據函數開始*void write_data(uchar dat)lcdrs=1; /低電平寫數據P0=dat; /寫入命令delay(3); /延時約3mslcden=1; /LCD使能端置高電平delay(5

12、); /延時約5mslcden=0; /LCD使能端拉低電平/*延時函數開始*void delay(uint k)uint i,j;for(i=k;i>0;i-)for(j=110;j>0;j-);單片機問題 哪位大俠能提供一個1602液晶閃爍的程序嗎#include <reg52.h> /包括一個52標準內核的頭文件/*/sbit RS=P24;sbit RW=P23;sbit E=P22;sbit P36=P36; sbit P20=P20; sbit P21=P21; unsigned char n,k,h,l,m;unsigned char d14='Z

13、','H', 'I','X','I','N','G','X','U','E','Y','U','A','N' /第二行要輸入的字符/*延時 z ms*/void delay(unsigned int z) /延時 z ms unsigned int i; unsigned char j; for(i=z;i>0;i-) for(j=110;j>0;j-);/*寫命令*/void zhiling(unsigned char a) /寫命令 E=0;RS=0;RW=0; E=1; P1=a; delay(5); /延時 5ms E=0; delay(5); /延時 5ms /*寫數據*/void shuju(unsigned char b) /寫數據 E=0;RS=1;RW=0; E=1; P1=b; delay(5); /延時 5ms E=0; delay(5); /延時 5ms /*初始化*/void init() /初始化 zhiling(0x01); /清屏 zhiling(0x30); /功能設置 zhiling(0x0e)