論文格式要求Instructions

1、論文格式要求 Instructions版式：用Word模板、題目、作者、單位、摘要、關鍵詞用通欄；其它用雙欄。Basic format: the title, author, author affiliations, abstract and key words shall fill in one column, others in two columns, justified to both margins in Microsoft word document. 2題目：避免使用希臘字母和上下標：Title: Avoid using Greek letters and the marks o

2、f superscript and subscript.3作者：作者拼寫方式為姓前名后，首字母大寫。聯系作者名字右上角打星號。聯系作者負責與編輯部的通信聯系和接受讀者的咨詢等，其聯系電子信箱地址放在文章首頁左欄下方。Authors：Chinese authors should put the family name before the given name with initials in capital. The corresponding author should be marked with “*” on the top right, whose E-mail address sha

3、ll be specified under the left column on the first page. 4. 單位：單位的著錄一般應到系一級或者室一級，單位應著錄全稱，單位的英譯應正確。Author affiliations: Correctly translate the full name of author affiliations and list them according to the name order under the paper title, which should include the department information, eg. Depart

4、ment of Aerodynamics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China5.摘要：一般為150200個英文單詞。Abstract: About 150-200 English words6關鍵詞：一般為5至8個；除專有名詞大寫外，全部小寫；關鍵詞之間用“;”分隔。Key words: About 5-8 words separated with “;”; use small letters except technical terms. 7.正文：正文用10磅Times New

5、 Roman字體，正文每段段首左空2字符起排，單倍行距。The text：Use 10-point Times New Roman. Begin each paragraph with an equal indentation of two typing spaces. The text should apply single line width. 8.標題：各級標題應分級編碼，第1個詞的首字母大寫，例如，1. Computation Scheme，1.1. Governing equation，等等4級標題（包括4級標題，如2.1.2）以下可用(1)，(2)，(3)，；再以下可用(a)，(

6、b)，(c)，Titles: Titles and subtitles should be marked to show the levels with the first letter capitalized, for example, 1. Computation Scheme, 1.1. Governing equation. The fourth and sub-fourth level subtitles (e.g., 2.1.2 ) can be marked with (1)，(2)，(3), and further level, (a), (b),(c)9.物理量、數值和單位：

7、HYPERLINK /search/en/physical+quantity Physical Quantity, Numerical Value and Unit:物理量、數值和單位要兼顧國標所有相關約定以及國際通行慣例。請盡量使用國際標準SI單位。HYPERLINK /search/en/physical+quantity Physical quantity, numerical value and unit should follow the national standard and international conventions. HYPERLINK /search.php?di

8、ctkeyword=international+system+of+units+%28SI%29 International system of units (SI) is preferred. 10.公式、方程：Formula and Equation:方程一般居中，用數字（加圓括號）順序編號，編號與行右端對齊，例如：Equations should be centered and ordered with Arabic numerals (in parentheses, lined up on the right margins). E.g. (1)如果在正文中引用該方程，用縮略形式，如“

9、Eq.(1)”；方程如有多行，數字編號與最后一行齊。Use the abbreviation such as Eq.(1) to cite the equation in the body text. If the equation is more than one line, put the Arabic numeral in the last line. 如果方程較長需要轉行，運算符號在上一行末，轉行部分與上一行等號左端對齊，方程之后視學科特點是否加標點，例如：If the equation is long, leave the operation symbol in the former

10、 line and start a new one in vertical alignment with the left side of “=”. Whether to use punctuation marks behind the equation is determined by different disciplinary features. E.g.: 注意：Notes:公式中用到小括號時，不要用公式編輯器中的括號，直接用鍵盤敲入即可。如：應該改用。When there is parenthesis in an equation, do not use the parenthesi

11、s in the Equation Editor but type it through keyboard. For instance, use instead of 2）正文中不要用公式編輯器插入符號，直接敲入即可。如：In the body text, do not use Equation Editor to insert symbols but type them directly. For example:Where means time, and J is Jacobian.3）公式編輯器中的行距不要改動，默認即可。Do not change the line-width in t

12、he Equation Editor.4）公式中的字號與正文一樣大，為10磅，且大小應為100%，不能隨意調整公式的大小。The size of the words(or symbols) in the Equation Editor is the same as that in the body text, i.e.,10-point Times New Roman, and the equation should be in its full size.11. 插圖和表格 Figure and Table 所有插圖和表格都需在正文中按順序被引用，一般放在離正文引用處最近的地方（先見文，后見

13、圖表）插圖的格式和精度應該滿足印刷版的基本要求圖中文字的正斜體要與正文統一(變量為斜體)；坐標軸標題和圖中每段注釋文字的第一個單詞須首字母大寫；在坐標系中，坐標原點用O，坐標名稱用物理量與其單位之比，如“p/MPa”，標線刻度統一朝內側；插圖依其先后順序編號（如“Fig.1”），圖題文字在圖的下方居中；圖與正文空倍間距；圖題、圖注和圖中的文字第一個單詞須首字母大寫。All the figures and tables should be cited in the body text in order. Put them close to where they are cited (first

14、the citation, then the tables or figures). The format and accuracy of figures should meet the requirement of printing. In the coordinate system, the origin of coordinate is identified as O, and the name of coordinates is composed of physical quantity and its unit separated by “/”, such as “p/MPa”. T

15、he gage mark should be inward. The first word of coordinate axis title should has its initial capitalized.Put the figures double-spaced from the text and number them such as “Fig.1”. The title should be centered below the figure. The first letters of title, notes in and outside the figure as well as

16、 words in the figure should be capitalized. In the figure, the format of words should accord with that in the body text (variables should be in italics). E.g.,Fig. 6 Comparison of computational efficiency among different solution algorithms for flow field.表格一律用三線表，依其先后順序編號（如“Table 2”）；表題在表的上方居中；表與正文

17、空倍間距；表頭中一般用物理量與其單位之比，如“p/MPa”；表注在表的下方，左端與表左端對齊；如果表較長需要轉頁，在下頁表的左上方標明，如“Table 2 (Continued)”。表格的示例如下：Tables should be double-spaced from the text, in three-line format and ordered in Arabic numerals such as “Table 2”. The title should be centered above the table. The header is composed of physical qua

18、ntity and its unit separated by “/”, such as “p/MPa”. The footer is below the table with its left in alignment with the left side of the table. If the table is long, indicate the new page with “Continued” in the left top side of the table, such as “Table 2 (Continued)”. E.g., Table 1 CPU time ratio

19、of each termComputational termCPU time/%Flow field32.6Solid temperature field 2.2Species concentration field 4.3Radiation transfer/energy field60.912. 參考文獻References 參考文獻用阿拉伯數字依其在文中第一次出現的先后順序編號；參考文獻中的期刊名字，以全稱形式表示；對于已經同意發表或出版的文章、圖書但未面市的，參考文獻列表中應該加以說明“in press”參考文獻的具體格式如下, 注意標點符號需與下文相符, 最好不要缺項。具體格式見下文

20、示例。Number the items with Arabic numerals according to the order they firstly appear in the text. The journal full name should be included in the reference. Accepted but unpublished materials should be indicated with “in press”. Note the use of punctuation marks and try to make each reference item co

21、mplete in information. For example:References書Book：1Matthews F L, Rawlings R D. Composite materials engineering and science. 2nd ed. New York: Chapman and Hall, 1994; 52-60.期刊Jounal paper：2Soutis C, Fleck N A. Static compression failure of carbon fibre T800/924C composite plate with single hole. Jou

22、rnal of Composite Materials 1990; 24(5):536-538.會議文集中析出的文獻Conference paper3Bassler H J, Eifler D. Characterisation of plasticity induced martensite formation during fatigue of austenitic steel. In: Rie K T, Portella P D. Low-cycle Fatigue and Elasto-plastic Behaviour of Materials. Amsterdam: Elsevie

23、r Sci Ltd, 1998; 235-240.4 Prairie R R, Zimmer W J. Statistical modeling for particle impact noise detection testing. IEEE Proceedings Annual Reliability and Maintainability Symposium. 1991; 536-540.報告Report：5Chadrasear R, Tiwari S N. Thermochemical nonequilibrium and radiative interactions in supersonic hydrogen-air combustion. AIAA-1992-0340, 1992. 學位論文Degree paper:6 Barbante P F. Accurate and efficient modeling of high-temperature nonequilibrium air flows. PhD thesis, von a