Q3D學習體會PPT幻燈片

1、Ansoft Q3D Extractor 演講人：王曉莉,1,Ansoft Q3D簡介,Q3D提取器結合HFSS， Ansoft Designer 以及Nexxim為高速、高性能互聯設計提供全面電磁解決方案。Q3D提取器能加速各種高速互聯結構設計，包括IC封裝（如引腳、bond wires）、PCB板布線及各種連接器、接插件、電纜、傳輸系統設計。該產品的發布，加之Ansoft Designer、Nexxim和HFSS，為以高性能IC設計為代表的高速互聯設計提供了一整套全新的電磁設計綜合解決方案， 對IC設計中的關鍵元件如平面螺旋電感、通孔、連線、片上電容等實現設計優化、虛擬仿真，并最終達到一次

2、成功。,2,Ansoft Q3D簡介,Q3D v6采用與HFSS v9和Ansoft Designer相同的全新設計界面，直觀、易用。新的設計環境將實現3D RLC參數提取所需的電磁場仿真功能無縫集成，并自動產生等效電路模型。設計者可以利用這種基于電磁場的等效電路模型準確完成如串?dāng)_、地反彈、延時、振鈴、反射等問題的信號完整性分析。,3,Ansoft Q3D 優勢,4,A 2D Grounded Coplanar Waveguide Model,5,Assign Conductors,Define trace as a signal line; Define Ground as Referenc

3、e Ground; Define top_gnd1 and top_gnd2 as a Non Ideal Ground.,6,Setting Up an Analysis,Add a Solution Setup; Add a Frequency Sweep; Perform a Maxtrix Reduction; Validate the Setup.,7,Running the Analysis,Solve the Problem,8,Generate the Reporter Plots,9,Generate Anoter Plots,10,Generate a Field Plot

4、,11,Generate Another Field Plot,12,Add a Parametric Sweep,13,Run the Parametric Analysis,14,Creating the Via Model,15,Setting Up the Simulation,Set up Sources and Sinks;,16,Setting Up the Simulation,Identify the Nets,17,18,Generate a Field Plot,19,Export a Circuit Model,20,Comparing the Solution,The

5、 graph shows that the via capacitance is only slightly affected by the radius of center barrel.,21,Comparing the Solution,The graph shows a much stronger effect from the pad radius than the center barrel radius,22,Z-Bend Coupled Microtrips,23,Setting up the Conductors,24,Setting up the Boundies and Source,25,Analysis Setup,Creating an Analysis Setup,26,Solution Data,27,Solutions,28,M