溫度傳感器DS18B20驅動程序

1、#include ds18b20.h#include #if 0/*FUNCTION NAME: InitDS18b20 *CREATE DATE: 2009/11/12 *CREATED BY: XS *FUNCTION: 復位DS18B20和檢測存在脈沖 *MODIFY DATE: 2009/11/12 *INPUT: 無 *RETURN: 初始化成功，返回1，否則返回0 */ BOOL InitDs18b20(void) BOOL flag = FALSE;BIT bt;bt = ET0;ET0 = 0;DQ = 1; Delay70us(1); /稍作延時DQ = 0; / 復位 De

2、lay70us(8); /精確延時大于480usDQ = 1; /拉高總線,等待存在脈沖Delay70us(1);/ 60-75us之間if(0=DQ)flag = TRUE; Delay70us(8);/ 復位后大于480us延時ET0 = bt;return flag;/*FUNCTION NAME: ReadByte *CREATE DATE: 2009/11/12 *CREATED BY: XS *FUNCTION: 從DS18B20中讀取一個字節的數據 *MODIFY DATE: 2009/11/12 *INPUT: 無 *RETURN: 讀取的數據 */ UCHAR ReadByt

3、e(void)UCHAR i;UCHAR dat = 0;BIT bt;bt = ET0;ET0 = 0;for (i=0;i= 1;DQ = 0; Delay5us(); DQ = 1; Delay5us();if(1=DQ)dat |=0x80;Delay70us(1);ET0 = bt; return(dat);/*FUNCTION NAME: WriteByte *CREATE DATE: 2009/11/12 *CREATED BY: XS *FUNCTION: 向DS18B20中寫入一個字節的數據 *MODIFY DATE: 2009/11/12 *INPUT: 寫入的數據 *RE

4、TURN: 無 */ void WriteByte(UCHAR wDat)UCHAR i;BIT bt;bt = ET0;ET0 = 0; for (i=0; i= 1; ET0 = bt;/*FUNCTION NAME: ReadDs18b20 *CREATE DATE: 2009/11/12 *CREATED BY: XS *FUNCTION: 從DS18B20儲存器中讀取多字節數據 *MODIFY DATE: 2009/11/12 *INPUT: 讀取數據存入的地址和需要讀取數據的數量 *RETURN: 無 */ void ReadScrat(UCHAR *prDat,UCHAR num

5、)UCHAR i;for(i=0;i=ERR_COUNTER)/ 連續3次初始化失敗，即認為DS18B20出現故障return 0;WriteByte(SKIP_ROM); / 跳過讀序號列號的操作WriteByte(CONVERT_T); / 啟動溫度轉換Delay70us(20); / 延時至少500us，以供溫度轉換while(1)if(InitDs18b20()counter = 0;break;elsecounter+;if(counter=ERR_COUNTER)/ 連續3次初始化失敗，即認為DS18B20出現故障return 0;WriteByte(SKIP_ROM); /跳過讀

6、序號列號的操作WriteByte(READ_SCRAT); /讀取溫度寄存器等（共可讀9個寄存器）ReadScrat(tempBuff, 9);if(0=CRC8(tempBuff,9)if(0=(tempBuff1&0x80)/為正溫度tempDat = (tempBuff1&0x07)*0x100 + tempBuff0;elsetempDat = (0xFF-tempBuff1)&0x07)*0x100 + (0x100-tempBuff0);tempDat = -tempDat;*prTemperature = tempDat * 0.0625;return TRUE;return F

7、ALSE;/*FUNCTION NAME: GetDS18B20Temperature *CREATE DATE: 2009/8/17 *CREATED BY: XS *FUNCTION: 采樣3次求均值作為溫度值 *MODIFY DATE: 2009/8/17 *INPUT: 溫度儲存的地址 *RETURN: 正常為1，故障為0 */ BOOL GetDS18B20Temperature(float *pgTemperature)UCHAR i;UCHAR counter = 0;float tempDat = 0;float tempVal = 0;for(i=0;i=ERR_COUNTE

8、R)/連續10次溫度采樣錯誤，則判斷為故障，并返回return FALSE;*pgTemperature = tempVal / 3;/SendStr(boxTemp:);/print(*pgTemperature ,1);/SendChar(n);return TRUE;/*FUNCTION NAME: CRC8 *CREATE DATE: 2009/8/17 *CREATED BY: XS *FUNCTION: CRC效驗 *MODIFY DATE: 2009/8/17 *INPUT: 需要效驗的數據地址和個數 *RETURN: 效驗結果 */ UCHAR CRC8(UCHAR *poin

9、t,UCHAR CRClen) /效驗成功則crc返回0 UCHAR i,j,crc_8,crcbuff; crc_8 = 0; for(i=0; iCRClen; i+) crcbuff=*point+; for(j=0;j= 1; else crc_8 = 0x18; crc_8 = 1; crc_8 |= 0x80; crcbuff = 1; return crc_8; /*FUNCTION NAME: Delay5us *CREATE DATE: 2009/8/17 *CREATED BY: XS *FUNCTION: 延時5us *MODIFY DATE: 2009/8/17 *INPUT: 無 *RETURN: 無 */ void Delay5us(void)/UCHAR i; /for(i=0;i7;i+);_nop_();_nop_();#endif/*FUNCTION NAME: Delay70us *CREATE DATE: 2009/8/17 *CREATED BY: XS *FUNCTION: 延時70us *MODIFY