20 檢測偶發的錯誤

1、檢測偶發的錯誤SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.1Information and Training Center Knowledge for Automation顯示CPU信息SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.2Information and Training Center Knowledge for Automation在診斷緩沖器中寫入用戶信息CPU節點SFC 52

2、 SEND = TRUE發送緩沖器12異步地向用戶程序發送 如：PG, OP診斷緩沖器SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.3Information and Training Center Knowledge for Automation配置用戶自己的文本信息SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.4Information and Training Center Knowledg

3、e for Automation調用SFC 52Network 2: User message when limit value exceededCMPR#analog value_ normalizedIN1M 90.1PSFC 52M 0.1=1M 0.1SENDW#16#A901EVENTNRET_VAL#error_sfc52INFO 1#dummy#analog value_ normalizedENIN25.000000e+003SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.5EN

4、OINFO 2Information and Training Center Knowledge for AutomationSFC 52 中EVENTN 參數的結構EVENTN0123456789101112131415種類特征號種類保留以備將來擴展C.F利用信息配置功能定義的自由文本A.B的標準文本（見標準和系統功能手冊）1.9號特征號可以連續從1 到 255到來的離去的內部錯誤外部錯誤的特征，例如：Bit 8= “1” -Bit 8= “0” -Bit 10= “1” -Bit 11= “1” -針對不同定義在一個種類中，SIMATIC S7Siemens AG 2000. All ri

5、ghts reserved.Date:2018/10/9File:SSP2_8C.6Information and Training Center Knowledge for Automation具有診斷功能的模塊具有診斷功能模塊的參數配置：. 當錯誤出現時，觸發一個診斷中斷 OB 82SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.7Information and Training Center Knowledge for Automation在SIMATIC管理器中顯示硬件診斷信息2xSIM

6、ATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.8Information and Training Center Knowledge for Automation練習8.1: 顯示診斷信息SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.9Information and Training Center Knowledge for Automation練習8.2: 輸出用戶信息*EN*SENDRET_VAL

7、EVENTNINFO1INFO2SFC 52?TRUE W#16#9101MW 54MD 56MW 52*在LAD方式下在 EN 端必須連接一個觸點SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.10Information and Training Center Knowledge for Automation練習8.3: 使能診斷中斷并仿真硬件錯誤序號步驟結果12345 利用硬件組態工具在一個模擬量模塊上使能診斷中斷允許硬件診斷將組態下裝到CPU拆除模擬量模塊的前連接器“SF”燈點亮指示硬件故

8、障打開硬件診斷工具顯示在線的系統配置確定故障原因顯示信息“Power supply failure”，表明故障原因為電源故障。SIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.11Information and Training Center Knowledge for Automation練習8.4: 評價錯誤處理OB的啟動信息OB 122 中評價啟動信息的示例LOB122_SW_FLT/Identifier read-only or write-only accessLB#16#42/Iden

9、tifier for read-only access=I/Compare for sameness=M 122.0/Auxiliary memory markerLOB122_MEM_ADDR/Address of module, that triggered the errorL352/Address of analog module (Version A)=I/Evaluation, if error from analog module=M 122.1/Auxiliary memory markerSIMATIC S7Siemens AG 2000. All rights reserved.Date:2018/10/9File:SSP2_8C.12Information and Training Center Knowledge for Automation練習8.5: 評價一個電池錯誤步驟操作結果321 從CPU上取下后備電池錯誤處理塊 OB 81被調用檢查輸出Q 5.7是否閃爍它可能不閃爍發