逆變器說明書中性-英文(共6頁)

1、精選優(yōu)質(zhì)文檔-傾情為你奉上Copyright2009-2012 USERS MANUALINVERTERPure sine-wave seriesProduct nameAgent or dealer(stamp)Style NO.CheckerTELLinkmanSeries NO.ADD.TELPurchased dateFaxMaintain recordDeliver dateMaintain contentRepairmanRemark6Please strictly comply with the warnings and operation guides explained in

2、 this manual. And keep the book properly.Dont operate this machine before reading all the safety instructions and operation guides. Otherwise, it will damage the devices or even cause safety accidents！Note: 1.Connect the DC input cable for use make sure when you distinguish between being "+&quo

3、t;negative "-" pole, as a direct result of inadvertent connection error will damage the inverter!2.When press the “on” button, at the same time must be see the green light and hear the sound of relay, keep press “on” button about 3sec, until buzzer sound, stop to press “on” button, the inv

4、erter will be turn on.3.If didnt follow steps 2 leading to not boot properly, please disconnect the battery cable, and then start button for about 10 seconds or continuous press several times, and then reconnect the battery cable, at last follow 1 step to operation.Content1.Operation instructions12.

5、Feature 23.Scope 24.Installation instructions 25.Front panel directions3-46.Specification57.Free repair and maintenance66. Technical SpecificationsPower(W)3005007501K1.5K2K3K5K8K10KDC voltage12/24V24/48V48V48/96V96/192VInput voltage160-265VACInput frequency4565HzInverter output voltage220VAC±5%

6、/50Hz±1%Inverter output waveshapepure sine-waveTransfer time<8msCharge currentMax 15AProtectionInput/output over high or low protecting;low battery protecting;surge and pike-currents protecting; overload protecting 100%-120% 30sec; >120% 100ms; >150%, 50ms output short circiut <150m

7、sNoise<45dBOperation temperature0-40Storage temperature-15 - +50Humidity0-90%(non-condensing, max)Operating height above sea level0-3,000meterStorage height above sea level0-15,00meter51. ON/OFF button 2. output voltage 3. load capacity4. load capacity 5. frequency display （DC model）6. input volt

8、age（AC model） 7. LINE AC input light8. INV inverter light 9. FAULT fault light 1. LCD display 2. LINE AC input light 3. INV inverter light 4. CHA charging light 5. FAULT fault light 6. ON/OFF button 7. CHK button 41. Secure Operation PrecautionsWe have fully considered personal and state safety fact

9、ors when designing the product. But improper operation may cause safety accident, so please comply the followings when using or installing for your safety and benefits:(1) When installing the inverter, professional operators are needed or connect with the dealer.(2) Assure the electric power supply

10、meets the standard. The battery DC voltage is the correct : the DC voltage input range is ±15% , the battery and the inverter input connector plus-minus must be correctly.Special notice: this product uses single-phase 220V voltage. Please check whether the output connector is connected well. Pl

11、ease confirm the load power dont be over the inverter power.(3) Dont douse any liquid into the inverter or use wet cloth to wipe the cabinet. Never touch the AC output or input connector with wet hands.(4) Never make bold to replace the accumulator connection wire of the inverter, if needed, please

12、contact the service department to confirm it.(5) Please dont use the inverter in sloppy, dusty, high temperature or temperature varies too sharply environment. Suggested environment temperature is 045. Please dont jam the louver beside the machine or use the machine beside heat sources such as elect

13、ric heater and radiator. Please avoid sunshine,dust and the dewing situation.(6) Dont let self-determination deficient people (such as a child) use the product. (7) Make sure connect ground wire when connecting the machine with indoor electric supply net, and the size of the input wires should meet

14、the demand of indoor loads, or it will heat deal if the size of the wire is too small and may cause fire accident. Suggested the machine should be operated by professional technicians. 12. Performance Specification of Intelligent inverter(1) The inverter is designed by our company independently; its

15、 controlled by CPU, high quality and modify sine wave intelligent inverter(2) Our product is used for the many kinds of the single phase equipments, example: motor, screw tools,tube light etc.family equipments, and also it can be used for the industry and communication equipments.(3) Single key inte

16、lligent switching, easy to operated(4) Output short circuit protection (when the inverter is working on battery mode): when there is short circuit, the inverter will indicate it and the machine will shut down automatically.(5) Overload protection: when there is overload, the machine will prompt you

17、and protect the inverter from being damaged automatically. Over 100%-120%, inverter shuts down 30s later, over 150%, inverter shuts down at once.(6) Internal circuit can protect the battery .when the battery voltage is under the 15% level,the inverter will be shut down at once.Warnning :A.If not all

18、owed by our company, this device cant supply power for the equipments which maintain the life B.This products is designed to supply the reserve inverted power for the home electric appliances, so its not fit for the precision equipmentsC.If it is used for the computer, the computer must have a enoug

19、h power inside. Or the computer maybe is restarted, when the city power is interrupted.3. Use range of Intelligent inverterit can be used for t family equipments, and also the industry and communication equipments.4. Installation Guides for inverter (1) 1000W power output and the following connections using the form of Multi-outlet, DC input lead straight out