激光產品資料.講解

1、扌丁印機耗材有P艮公司激光產品納思達研發中心激光產品分類及適用機型:激光丿八品 的分類及 適用機型 圖一體式碳粉盒（HP系列,CAN ON系列）填充碳粉（HPLaserjet系列，Canon Laseijet 系列）分體式碳粉盒適用于Brother/Toshiba/ Mita/Oki/Panasonic/Canon/Ricoh 等系列制鼓保護罩打印機原理充電fe(PCR) 清潔刮刀(WB激光廠出粉刀(DB)攪拌棒碳粉(TONER)l0充電 conditioning2.0寫錄（曝光）writing30顯影 Developing4.0轉印 Transferring50定影Fusing60清潔Cle

2、aning70放電Discharginglinage Formation stage txvo: WritingIASE圖像形成第二步:寫錄（曝光）攜帶數字信息的激光束匚 描感光鼓表面，接受激: 照射的鼓表面變?yōu)閷w 靜電荷消失，在鼓的表i 形成了電位不一靜電潛水In this stage,the laser beam with di signal makes contact with the OPC d surface. The exposed area becomes conductive and discharges the surfac chanrge to round ,formin

3、g a electric latent image on the drum surface.圖像形成第三步:顯影Image Formation stage three developing在顯彫區, 碳粉圖像。感光鼓表而的靜電潛像變?yōu)榭?首先碳粉被吸引到磁轆農面。粉刀的控制下，在磁輪表面形成一特定厚 均勻碳粉層，并通過磨擦使碳粉帶電。再 AC/DC偏壓作用，使碳粉在磁餛表而震動 轉移到OPC上。OPC上的潛像區吸引碳粉 面形成可見的碳粉圖像。Developing is to convert the electric latent image into visible toner image a

4、l the developii station. Toner is attracted onto the mag sleeve nlagnetically from the toner hoppenand charge via friction between the mag sleeve and the de blade.The doctor blade also evenly meters the toner amount on the mag SLEEVE.An AC/DCvoltage give the toner a negative charge bias transfers th

5、e toner to the OPC.圖像形成第四步:轉印Image Formation stage four:Transferring 攜帶碳粉圖像的鼓轉動 并與同樣速度的紙相遇 轉印親給紙背面施以正 的電壓，使帶負電的碳 粉被吸引到紙上。The drum with toned image rotates ar contacts with the media that delivered I the delivery system at the same rate.Ar opposite charge is placed on the backsi of paper by the trans

6、fer roller.The char： attracts the toner from the drum onto th media.圖像形成第五步:定影Image Formation stagefi ve: Fusing攜帶碳粉圖像的紙進入定組件，定影組件由一個加; 轆和一個壓力轆組成。成: 和壓力的作用下，碳粉粒匚 被子熔進紙纖維中，形成U 壘 們所看到的打印稿。The media with toned image enters into the I section.The fuser contains two rollers heate roller and pressure roll

7、er.Here the toner is adh to the media by heating it up and pressing it in media,forming a fixing image.Image Formation stage six:Cleaningseven: Discharging圖像形成第六步:清潔由于鼓表面的碳粉并不 會100%地被轉移到紙上， 殘余在OPC上的粉要用清汩 刮刀清除下來，并收集到底 粉倉內。After transfer,there is a little amount to left on the drum surface due to stat

8、ic ch The remains toner is scrapped off by th wiper blade and deposited into the was圖像形成第七步:消電linage Formation stage經過轉印后鼓表面仍帶 有靜電荷，要靠充電輾 使用其靜電消除，以便 進行下一周期的顯影。There is also a certain amount ol charges on the drum after transfe charge from PCR discharges the residual charges.缺陷分析步驟:缺陷足-個粉盒還 -是多個粉盒是否在每頁稿 面固定位貿一個為粉盒問題多個則有關 打印機問題 是。年J關扌 印機問題不。有關粉 盒問題參考后附缺陷 確疋缺陷來源缺陷_導致相部件應缺陷 空心字一定影轆一鬼影條紋 黑印轉印轆一空心字 色淺空白反射鏡一-漏印空白 高壓導致大部分一電源一缺陷缺陷：規律性黑塊問題：稿面上有規律性黑塊。原因：1. 充電轆上粘有雜質或粘膠I2. 充電餛破損。解決方法：1. 清潔充電轆。更換。rlF LaserJet 6L Pro問題：稿面規律性字跡模糊。i嚴/ ：原因：感光鼓或充電車昆表面涂層污 染（如粘有水印、油印、手指 印等）。xnw” Ml PACHAQO解決方法：列印多張空白文稿。hp