拉索幕墻施工質量控制要點

1、拉索幕墻施工質量控制要點securely, no throwing tools and waste； The deployment of material should be tuned on the ground after the first， and then sent to the area, materials to be sealed after the remaining material; Material piled up must be kept away from fire, toxic substances must be sealed, and fire equipm

2、ent; When transporting material, watch out for falling hurts， is strictly prohibited in the construction close to Fireworks， meanwhile, had to carry fire-fighting equipment; When the operator， such as headache， nausea， and should cease operations. With materials stimulate the allergic persons， shall

3、 participate in the work； Side facing the House working at height, 1.2m and high fences， and hang buckles seat belt； Targeted security gives the low-down on construction site； Others. Disclosure signatures to accept cards deliver the signature time Japan form in duplicate， teams 。 Eight， provided by

4、 the General machinery and equipment, scaffolding and other facilities， erection, installation is completed before delivery， the total package in conjunction with the acceptance of relevant subcontracted the construction units work in accordance with the regulations， and prepare written procedures f

5、or acceptance and delivery, is strictly prohibited in the case of unqualified acceptance or acceptance into use. Nine， all subcontractors and General units such as the mutual borrowing or rental equipment and tools you need， there should be both relevant personnel of borrowing or leasing procedures，

6、 develop safe use and management systems. Lending unit should ensure the loaned equipment and tools in good condition and in accordance with the requirements， borrowing unit must be checked and written handover records. Ten, the sub-contractor for scaffolding， construction site facilities， equipment

7、 safety protection facilities, safety signs and warning signs may be supplemented, removed， changed. If needed change, must be approved by the head of construction and safety managers agreed, and to take the necessary and reliable security measures can only be removed. Plenary and small mechanical o

8、perations, special operations and personnel, required training, after passing the examination by the relevant departments， with valid ID posts。 Hoisting personnel must abide by ”hanging ten rule， strictly illegal， unlicensed operation; staff know nothing about electrical and mechanical equipment is

9、strictly prohibited and unauthorized operations use electric appliances, machinery and equipment. 12, the subcontractor must strictly implement the system of fire prevention and explosion protection, flammable and explosive places non-smoking and the use of open flames， firefighting equipment are no

10、t allowed to divert it. Welding and gas cutting operation shall follow the provisions of fire approval procedures， strict compliance with the ”ten does not burn” provisions, prohibited the use of furnaces. Construction such as open flame heating measures must be used， you should obtain the consent o

11、f General fire拉索幕墻施工質量控制要點 南京第一建設事務所有限責任公司 ？ 葛群星 摘要 本文結合拉索幕墻的施工過程,對鋼結構框架與拉索幕墻之間連接及玻璃安裝施工質量控制要點簡要論述與分析。 關鍵詞 鋼結構 拉索幕墻 玻璃安裝 施工質量 控制要點 南京青奧體育公園項目市級體育中心拉索幕墻工程1。23萬平方米，地下1層，地上6層,砼框架+鋼結構,總高度為42米，幕墻高度為30。45米，幕墻設計使用年限不少于25年,抗震設防7度，防火設計建筑分類一級，幕墻防雷設計等級二類，幕墻結構安全等級二級，本次監理的范圍包括體育館立面的拉索玻璃幕墻. 該工程體育館外周48根柱為直徑78。5CM鋼

12、管柱外包鋼筋混凝土結構,鋼管柱芯注入C40混凝土至10。15米標高，有6跨從一層+0.00起鋼管柱外斜至6層34.00米標高，其余42跨從二層5.400米標高起向上至6層34.00標高傾斜，傾斜夾角角度為75度，整個體育館外形呈底口小上口大口杯型狀，并且上口標高高度不等，本工程拉索玻璃幕墻，玻璃板塊分格為矩形，為了增加工程的美觀性，同時也為了玻璃更好的受力，駁接件選用球鉸夾具,使玻璃和夾具形狀更為統一，在風荷載作用時球鉸結構的中心基本處于玻璃中心,使玻璃在撓度限值內產生自由變形，使玻璃應力大大降低，下面結合本工程拉索幕墻的施工過程，對該拉索結構的關鍵節點進行簡述: securely, no t

13、hrowing tools and waste; The deployment of material should be tuned on the ground after the first， and then sent to the area， materials to be sealed after the remaining material； Material piled up must be kept away from fire， toxic substances must be sealed, and fire equipment; When transporting mat

14、erial, watch out for falling hurts, is strictly prohibited in the construction close to Fireworks, meanwhile， had to carry firefighting equipment； When the operator， such as headache， nausea, and should cease operations. With materials stimulate the allergic persons， shall participate in the work; S

15、ide facing the House working at height， 1。2m and high fences, and hang buckles seat belt； Targeted security gives the low-down on construction site； Others. Disclosure signatures to accept cards deliver the signature time Japan form in duplicate, teams 。. Eight， provided by the General machinery and

16、 equipment， scaffolding and other facilities， erection, installation is completed before delivery, the total package in conjunction with the acceptance of relevant subcontracted the construction units work in accordance with the regulations， and prepare written procedures for acceptance and delivery

17、, is strictly prohibited in the case of unqualified acceptance or acceptance into use。 Nine， all subcontractors and General units such as the mutual borrowing or rental equipment and tools you need， there should be both relevant personnel of borrowing or leasing procedures, develop safe use and mana

18、gement systems. Lending unit should ensure the loaned equipment and tools in good condition and in accordance with the requirements， borrowing unit must be checked and written handover records。 Ten， the sub-contractor for scaffolding， construction site facilities, equipment safety protection facilit

19、ies, safety signs and warning signs may be supplemented, removed， changed。 If needed change， must be approved by the head of construction and safety managers agreed， and to take the necessary and reliable security measures can only be removed。 Plenary and small mechanical operations, special operati

20、ons and personnel, required training, after passing the examination by the relevant departments, with valid ID posts。 Hoisting personnel must abide by hanging ten rule, strictly illegal, unlicensed operation； staff know nothing about electrical and mechanical equipment is strictly prohibited and una

21、uthorized operations use electric appliances， machinery and equipment。 12， the subcontractor must strictly implement the system of fire prevention and explosion protection, flammable and explosive places nonsmoking and the use of open flames, firefighting equipment are not allowed to divert it。 Weld

22、ing and gas cutting operation shall follow the provisions of fire approval procedures, strict compliance with the ten does not burn provisions, prohibited the use of furnaces。 Construction such as open flame heating measures must be used, you should obtain the consent of General firesecurely, no thr

23、owing tools and waste; The deployment of material should be tuned on the ground after the first, and then sent to the area， materials to be sealed after the remaining material； Material piled up must be kept away from fire, toxic substances must be sealed, and fire equipment; When transporting mater

24、ial, watch out for falling hurts, is strictly prohibited in the construction close to Fireworks， meanwhile， had to carry firefighting equipment; When the operator, such as headache， nausea， and should cease operations. With materials stimulate the allergic persons, shall participate in the work； Sid

25、e facing the House working at height， 1。2m and high fences， and hang buckles seat belt； Targeted security gives the low-down on construction site； Others. Disclosure signatures to accept cards deliver the signature time Japan form in duplicate， teams 。 Eight， provided by the General machinery and eq

26、uipment， scaffolding and other facilities， erection， installation is completed before delivery， the total package in conjunction with the acceptance of relevant subcontracted the construction units work in accordance with the regulations， and prepare written procedures for acceptance and delivery, i

27、s strictly prohibited in the case of unqualified acceptance or acceptance into use. Nine， all subcontractors and General units such as the mutual borrowing or rental equipment and tools you need, there should be both relevant personnel of borrowing or leasing procedures， develop safe use and managem

28、ent systems. Lending unit should ensure the loaned equipment and tools in good condition and in accordance with the requirements, borrowing unit must be checked and written handover records. Ten, the subcontractor for scaffolding， construction site facilities, equipment safety protection facilities,

29、 safety signs and warning signs may be supplemented， removed， changed. If needed change， must be approved by the head of construction and safety managers agreed, and to take the necessary and reliable security measures can only be removed. Plenary and small mechanical operations, special operations

30、and personnel， required training, after passing the examination by the relevant departments, with valid ID posts. Hoisting personnel must abide by ”hanging ten rule， strictly illegal， unlicensed operation； staff know nothing about electrical and mechanical equipment is strictly prohibited and unauth

31、orized operations use electric appliances， machinery and equipment. 12， the subcontractor must strictly implement the system of fire prevention and explosion protection， flammable and explosive places nonsmoking and the use of open flames， fire-fighting equipment are not allowed to divert it。 Weldin

32、g and gas cutting operation shall follow the provisions of fire approval procedures， strict compliance with the ten does not burn” provisions, prohibited the use of furnaces。 Construction such as open flame heating measures must be used, you should obtain the consent of General fire1 拉索耳板定位焊接 應控制預埋件

33、、后植埋件材質質量，通過測量放線對豎、橫向拉索耳板定位，對焊接質量、標高、角度位置進行驗收，由于勁鋼柱母材材質是Q345B，設計要求拉索耳板材質必須與母材相匹配，焊縫等級為一級，要求施工單位進行超聲波探傷自檢檢測，監理人員進行旁站，發現問題后進行整改，然后進行復查,監理經過施工方自檢檢測記錄，上報給業主，由業主安排有資質的第三方檢測單位再進行按設計規范要求進行抽檢，抽檢全數合格后，經監理部隱蔽驗收后，方可進行防腐工序處理。 2 豎、橫拉索的布設 form (3), and accident hidden processing standard (4), and site security lo

34、g 3, and security supplies acceptance records （business license, and production license, and factory certificate, and products detection report or its He proved material attached Hou） 4， and construction site temporary electricity archives （1)， and site temporary electricity electrical operation sec

35、urity technology lowdown (2), and construction site temporary electricity acceptance table （3)， and grounding resistance test records （4）， and mobile and the handheld mobile tool regularly insulation resistance test records （5）， and electrical daily visits maintenance records （6)， and construction s

36、ite electrical equipment check records table (7)， and distribution box each ten special check records table 5, and pit support nursing acceptance table (1), and pit adjacent buildings settlement observation records table （1 ）， Deformation monitoring of Foundation pit support records in table 6， form

37、work supporting system acceptance table 7， template removal request form 8， a special type of scaffold (pick, try hung， attached lifting scaffolding) tables 9， scaffold erection acceptance acceptance form (General， high-rise scaffolding) 10， scaffolding removed (including the main component) applica

38、tion form 11， Derrick and crane installation acceptance form 。. Site temporary power electrician safety technology gives the low-down (reference tables) construction construction construction organization name project name 5-41 content security technology to give the low-down the content must be app

39、roved by the technical training hold special operations after passing the examination certificate; The ease with which engaged in electrical work must meet the electrician required。 On the more difficult and more complex electrical engineering shall not be completed by the lower-level electrician； E

40、lectricians must be familiar with the technical specifications of the temporary electricity in construction site safety; All insulation， testing tools， and should be properly kept, it is strictly prohibited to use, and should be inspected regularly, check; Line no load on or off, and prohibit the ch

41、arged operation； Dangerous job， someone must monitor at the safe distance； When debugging and maintenance of electric power transmission， in addition to reliable power measures, should be hung at the switch box ”action to suppress the closing sign, and with special care； Targeted security gives the

42、low-down on construction site; Others. Disclosure signatures to accept cards deliver the signature time Japan three copies of the form, team and keep a， filed a report， the security sector。 Temporary electricity in construction site acceptance form project name supply planning capacity (KW） rated cu

43、rrent a wire cross section ? plant protection system serial number check acceptance requirements results 1-construction organization design of temporary power supply onsecurely， no throwing tools and waste; The deployment of material should be tuned on the ground after the first， and then sent to th

44、e area， materials to be sealed after the remaining material; Material piled up must be kept away from fire， toxic substances must be sealed， and fire equipment; When transporting material, watch out for falling hurts， is strictly prohibited in the construction close to Fireworks， meanwhile， had to c

45、arry fire-fighting equipment； When the operator， such as headache, nausea, and should cease operations. With materials stimulate the allergic persons, shall participate in the work; Side facing the House working at height， 1。2m and high fences, and hang buckles seat belt； Targeted security gives the

46、 low-down on construction site; Others. Disclosure signatures to accept cards deliver the signature time Japan form in duplicate， teams .。 Eight, provided by the General machinery and equipment, scaffolding and other facilities, erection, installation is completed before delivery， the total package

47、in conjunction with the acceptance of relevant subcontracted the construction units work in accordance with the regulations， and prepare written procedures for acceptance and delivery, is strictly prohibited in the case of unqualified acceptance or acceptance into use。 Nine， all subcontractors and G

48、eneral units such as the mutual borrowing or rental equipment and tools you need, there should be both relevant personnel of borrowing or leasing procedures， develop safe use and management systems. Lending unit should ensure the loaned equipment and tools in good condition and in accordance with th

49、e requirements, borrowing unit must be checked and written handover records。 Ten， the sub-contractor for scaffolding， construction site facilities, equipment safety protection facilities, safety signs and warning signs may be supplemented， removed, changed。 If needed change, must be approved by the

50、head of construction and safety managers agreed, and to take the necessary and reliable security measures can only be removed。 Plenary and small mechanical operations, special operations and personnel， required training， after passing the examination by the relevant departments， with valid ID posts。

51、 Hoisting personnel must abide by ”hanging ten rule， strictly illegal, unlicensed operation; staff know nothing about electrical and mechanical equipment is strictly prohibited and unauthorized operations use electric appliances， machinery and equipment。 12， the subcontractor must strictly implement

52、 the system of fire prevention and explosion protection, flammable and explosive places non-smoking and the use of open flames， fire-fighting equipment are not allowed to divert it。 Welding and gas cutting operation shall follow the provisions of fire approval procedures， strict compliance with the

53、”ten does not burn provisions， prohibited the use of furnaces。 Construction such as open flame heating measures must be used， you should obtain the consent of General fire由于體育館每跨跨矩及高度均不等，要求施工單位進行現場細致的統計、測算，按編號順序下定單，該工程所有的拉索為不銹鋼“堅朗品牌，豎索直徑為18MM，橫索直徑為20,，和18MM兩種規格，體育館主體部分采用拉索點式玻璃幕墻系統，拉索幕墻的荷載組合:自重，風荷載，地

54、震荷載,溫度荷載，系統采用水平魚腹形雙層索，豎向承重索,穩定索結構，水平索主要承受水平，豎向承重索主要承受點式幕墻自重，豎向后部穩定索主要起穩定結構工作，拉索進場后，監理人員開箱檢查產品合格證、產品說明書、出廠檢測報告，同時要求隨機抽取進行見證取樣，由業主委托的資質檢測單位進行復檢，合格報告出具后,準許施工單位按照編號順序安裝調試，監理部組織人員進行驗收。 ，拉索撐桿及球形鉸不銹鋼夾具安裝 securely， no throwing tools and waste； The deployment of material should be tuned on the ground after t

55、he first, and then sent to the area， materials to be sealed after the remaining material; Material piled up must be kept away from fire, toxic substances must be sealed, and fire equipment; When transporting material， watch out for falling hurts, is strictly prohibited in the construction close to F

56、ireworks， meanwhile, had to carry fire-fighting equipment； When the operator, such as headache, nausea, and should cease operations。 With materials stimulate the allergic persons, shall participate in the work; Side facing the House working at height, 1.2m and high fences， and hang buckles seat belt

57、; Targeted security gives the low-down on construction site; Others. Disclosure signatures to accept cards deliver the signature time Japan form in duplicate， teams .。 Eight， provided by the General machinery and equipment, scaffolding and other facilities, erection, installation is completed before

58、 delivery， the total package in conjunction with the acceptance of relevant subcontracted the construction units work in accordance with the regulations， and prepare written procedures for acceptance and delivery， is strictly prohibited in the case of unqualified acceptance or acceptance into use. N

59、ine， all subcontractors and General units such as the mutual borrowing or rental equipment and tools you need, there should be both relevant personnel of borrowing or leasing procedures， develop safe use and management systems. Lending unit should ensure the loaned equipment and tools in good condit

60、ion and in accordance with the requirements, borrowing unit must be checked and written handover records。 Ten, the subcontractor for scaffolding， construction site facilities， equipment safety protection facilities， safety signs and warning signs may be supplemented， removed, changed。 If needed chan