DB43-T 2261-2021 智能高壓噴霧除臭設備通用技術條件

ICS

71.120.99CCS

G

43湖 南 省地 方 標 準DB43/T

2261—2021智能高壓噴霧除臭設備通用技術條件General

specification

for

intelligent

high

pressurespray

deodorizing

equipment2021

-

12

-

29

發布

2022

-

-

實施湖南省市場監督管理局

發

布DB43/T

— 前言························································································································

Ⅲ1 ·····················································································································

12 規范性引用文件······································································································13 術語和定義············································································································14型號、基本參數、工作條件·······················································································

24.1 型號···············································································································24.2 基本參數·········································································································24.3 工作條件·········································································································25 ·····················································································································

35.1 一般要求·········································································································35.2 外觀要求·········································································································35.3制造要求·········································································································35.4 功能要求·········································································································35.5安全要求·········································································································35.6 噪聲要求·········································································································45.7 運行要求·········································································································45.8 噴霧除臭性能要求·····························································································

46試驗方法···············································································································46.1試驗條件及試驗前的準備····················································································

46.2 一般要求·········································································································46.3 外觀檢查·········································································································46.4制造要求·········································································································46.5 功能要求·········································································································46.6 安全要求·········································································································46.7噪聲···············································································································56.8運轉要求·········································································································56.9 噴霧除臭性能···································································································57檢驗規則···············································································································57.1 檢驗分類·········································································································57.2出廠檢驗·········································································································57.3 型式檢驗·········································································································57.4檢驗項目和缺陷分類··························································································

67.5 判定規則·········································································································6DB43/T

—8

··························································································

68.1 標牌···············································································································68.2 包裝···············································································································68.3 運輸和貯存······································································································7IIDB43/T

— 本文件按照

GB/T

—2020《標準化工作導則 第

1

部分：標準化文件的結構和起草規則》的規定起草。請注意本文件的某些內容可能涉及專利。本文件的發布機構不承擔識別專利的責任。本文件由湖南省工業和信息化廳提出并歸口。本文件起草單位：湖南諾瑞環境科技有限公司。本文件主要起草人：譚兵、朱少華、李濤。本文件于

2021

年

08

月

日首次發布。IIIDB43/T

—1

志、包裝、運輸。2

規范性引用文件文件。GB/T

包裝儲運圖示標志GB/T

—2019機械電氣安全 機械電氣設備 第

1

部分：通用技術條件GB/T

13306 JB/T

鋼制焊接常壓容器3

術語和定義下列術語和定義適用于本文件。3.1智能高壓噴霧除臭設備由機柜、水箱、水位開關、電機、柱塞泵、比例泵、

PLC、觸摸屏、

電磁閥等配件組成。通過高壓管路將加壓的稀釋液輸送到“超微細”高壓噴嘴霧化，并高速旋轉，噴射出（1～15m

的超微霧粒子，隨著超微霧粒子在空氣中迅速擴散，將稀釋液噴射到所要求除臭的區域，實現除臭用的設備。3.2霧粒霧粒是指顆粒直徑在

1μm～15μm

之間的水滴可見集合體。3.3射距最大射距是指在靜風狀態下，噴嘴噴出的霧粒能夠達到到最遠的水平距離。3.4霧化粒度智能高壓噴霧除臭設備達到最大水平射距時的霧粒直徑。3.5高壓管路連接柱塞泵到各霧化噴嘴之間的配件，包括高壓管、接頭和管件。DB43/T

—3.6泵額定流量智能高壓噴霧除臭設備所有霧化噴嘴

1

分鐘內霧化出來的最大水量總和。4

型號、基本參數、工作條件4.1 型號智能高壓噴霧除臭設備型號編制方法如下：4.2 基本參數智能高壓噴霧除臭設備的基本參數如下：a）

電源電壓,V；b）

總功率,kW

；c）

最大流量,L/min；d）

工作壓力：MPa；e）

額定霧滴直徑,μm；f）

噴霧方式；g）

機箱材質；h）

通訊接口；i）

控制方式；j）

藥劑配比；k）

,

kG；l）

外形參考尺寸：㎜×㎜×㎜；4.3 工作條件4.3.1 環境溫度：

55

℃。4.3.2環境相對濕度：％～85％。4.3.3 大氣壓力：

～106

kPa。4.3.4 海拔高度應不大于

1000m。4.3.5 供電電源：

（1±5％）V，

Hz±1

。4.3.6 水質條件如下：a）

水源懸浮物≤50

mg/L；b）

PH

6～8；c）

硬度≤450

mg/L。DB43/T

—5

5.1一般要求5.1.1 智能高壓噴霧除臭設備應符合本標準的規定，并經規定程序批準的產品圖樣和技術文件制造。5.1.2 所有零部件應經檢驗合格，外購件、外協件應有合格證或經檢驗合格方可使用。5.1.3 機柜應采用不銹鋼材質，箱體厚度應大于

mm，門及隔板的厚度應大于

。5.1.4 智能高壓噴霧除臭設備應配有過濾裝置，滿足噴霧質量。5.2 外觀要求5.2.1 機柜表面應無裂紋、無明顯劃痕及無毛刺。5.2.2 機柜應無壓痕、碰傷、磨損。5.2.3 金屬零部件不應有腐蝕及其它機械損傷現象。5.2.4 智能高壓噴霧除臭設備銘牌、安全標記應正確

、清晰。5.3 制造要求5.3.1

JB/T

4735.1

的規定進行。5.3.2 各緊固件緊固可靠，重要部位應采取放松措施。5.3.3 各管路、電氣線路應排列整齊、固定牢靠，不應與其他零部件發生摩擦或碰撞，管路彎曲處應圓滑，盡可能避免扭曲連接。5.3.4 全部管路、管道及其他固定與活動的密封處，均應連接可靠，密封良好，不得有滲漏現象。5.4 功能要求5.4.1 應具有模式選擇功能?？蛇x手動工作模式和自動工作模式和清洗模式。5.4.2 應具有設定功能。可進行工作時段的設定，可實現定時開機，定時關機。5.4.3 應具有自動進水功能，正常運行過程中無需人工干預。5.4.4 應具有缺液及液滿保護功能。水箱降低至低液位開關時，打開自動供水。水箱液位升至設定液位時，關閉供水。補水及滿液保護自動循環。5.4.5 應具有報警功能。缺液時應有聲、光報警。5.4.6 停止噴霧時，機體應能自動將高壓噴管的壓力釋放，使液體回流以防止噴頭滴水現象。5.4.7 應能根據啟停狀態自動調節高壓泵壓力，保護高壓泵、電機及管路的安全。5.4.8 應具有藥劑自動配比功能。應能根據系統設置的參數，自動配比出藥劑比例，并儲存在混藥箱內，供噴霧使用。5.4.9 應具有除臭藥劑和滅蠅藥劑分開噴霧裝置，根據設定時間定時啟動相應噴霧裝置。5.4.10 應具有觸摸屏顯示功能，顯示工作流程界面及每個裝置的運行狀態。5.5 安全要求5.5.1 電機的防護等級應滿足

IP54

及以上。5.5.2 安全閥應處于正常工作狀態。5.5.3 應有可靠的接地端子并有明顯的接地標志。5.5.4

500

Vd.c

時測得的絕緣電阻應大于

1

M5.5.5

50

Hz，1000

V，至少

1

s

時間的耐壓試驗，無閃爍和擊穿現象。DB43/T

—5.6 噪聲要求正常工作時的聲壓級噪聲應不大于

dB（A）。5.7 運行要求5.7.1 智能高壓噴霧除臭設備在額定工況下運轉，應無異常振動和響聲，緊固件不應松動。5.7.2 泵運轉應平穩，不應有異常振動、聲響和卡滯現象。5.7.3 噴霧機構反映靈敏，噴霧均勻。5.7.4 管路承受

倍工作壓力。保持

5

min，各接頭連接牢固，不應出現滲水、漏水現象，承壓管件外形無明顯的異常變形。5.8 噴霧除臭性能要求在泵額定壓力和流量下，射距應不小于

2

m，霧化粒度為

1μm～μm。6

試驗方法6.1 試驗條件及試驗前的準備6.1.1 溫度和濕度

5～

50％。6.1.2試驗用介質試驗用的介質除有特殊要求外，為不含固體懸浮物的常溫清水。6.2 一般要求6.2.1板材厚度檢驗采用游標卡尺分別測量箱體、門四周邊緣及隔板的

4

個點，其測量值分別滿足

5.1.3

的要求。6.2.2 其它項目采用目測或核查等方法確認。6.3 外觀檢查目測和觸摸檢查智能高壓噴霧除臭設備的外觀質量。6.4 制造要求6.4.1 滲漏試驗整機正常運行

后，目測滲漏情況。6.4.2 其他項目采用目測和核查等方法確認。6.5 功能要求按照使用說明書操作檢查各操作部位及功能應符合

5.4

的規定。6.6 安全要求6.6.1

GB

5226.1—2019

中

的規定進行。DB43/T

—6.6.2 耐壓試驗按照

GB

5226.1—2019

中

18.4

的規定進行。6.6.3 其余項目采用目測或核查等方法確認。6.7 噪聲在環境噪聲不大于

60

dB（A）的場地上進行測量。把智能高壓噴霧除臭設備中的泵的壓力流量開周障礙物的距離應大于

2

m。測量點距地面高度為

m，距智能高壓噴霧除臭設備箱體外輪廓線

1m，智能高壓噴霧除臭設備的噪聲以各測量點噪聲值的最大值計。6.8運轉要求6.8.1壓力試驗以

1.5

倍工作壓力運行智能高壓噴霧除臭設備，5

后，采用目測查看滲漏及管路情況。6.8.2 其他項目采用目測和核查等方法確認。6.9 噴霧除臭性能6.9.1 最大射距在清水中加重量比為

120

50

毫米

霧時間為

三次，取其平均值。6.9.2 霧化粒度檢驗采用光學儀器，測量光通量，換算成霧化粒度。7

檢驗規則7.1 檢驗分類智能高壓噴霧除臭設備分出廠檢驗和型式試驗。7.2 出廠檢驗

1

后，方可出廠。7.3 型式檢驗7.3.