通信 外文翻譯 外文文獻 英文文獻 擴頻通信系統的介紹

1、外文出處：/en/app-notes/index.mvp/id/1890/擴頻通信系統的介紹一、擴頻通信的原理擴頻是香農定理的典型：c=blog2(1+s/n) 公式（1）在公式中，c為信道容限，單位是比特/秒(bps),意指單位時間內信道中無差錯傳輸?shù)淖畲笮畔⒘俊為信號頻帶寬度，單位是hz，s/n為信噪比。也就是說，c為信道允許通過的信息量，也代表了擴頻的性能。帶寬(b)是代價，因?yàn)轭l率是一個有限的資源。信噪比體現了環境條件或物理特性（如障礙、干擾器、干擾等）。上式說明，的情況下，在無差錯傳輸?shù)男畔⑺俾蔯不變時，如果信噪比很低，則可

2、以用足夠?qū)挼膸拋?lái)傳輸信號，即使信號功率密度低于噪音水平。（公式可用！）改變公式（1）中對數的底數，2改為e，則為in=loge。因此，c/b=(1/ln2)ln(1+s/n)=1.443ln(1+s/n) 公式（2） 根據maclaurin擴展公式ln(1+x)=x-x2/2+x3/3-x4/4+(-1)k+1xk/k+:c/b=1.443(s/n-1/2(s/n)2+1/3(s/n)3-) 公式（3）在擴頻應用中，通常s/n很低。（正如剛才提到的，信號功率密度甚至低于噪音水平。）假定噪音水平即s/n1，香農公式可簡單表示為：c/b1.443s/n 公式（4）簡化為：c/ns/n 公式（5）

3、或者：n/sb/c 公式（6）向固定了信噪比的信道發送錯誤的信息，只要執行基本擴頻信號的傳播操作：增加傳輸帶寬。盡管這一原則看起來很簡單明確，但實現她卻很復雜，主要是因?yàn)檎箤捇鶐У碾娮釉O(shè)備必須同時存在展寬和解擴的操作過程。二、定義不同的擴頻技術都有一個共同之處：密鑰（也稱為代碼或序列）依附于傳輸信道。以插入代碼的形式準確地定義擴頻技術，術語“頻譜擴展”是指擴頻信號的幾個數量級的帶寬在有密鑰的傳輸信道中的擴展。以傳統的方式定義擴頻更為精確：在射頻通信系統中，將基帶信號擴展為比原有信號的帶寬寬得多的高頻信號（如圖1）。在此過程中，傳輸寬帶信號產生的損耗，表現為噪聲。擴頻信號帶寬與信息帶寬之比稱為處

4、理增益。擴頻過程的處理增益大都在10db 到60db之間。要應用擴頻技術，只需在天線（接收器）之前加入相應的擴頻碼。相反，你可以刪除一個點的擴頻碼（稱為解擴操作）接收發射鏈路數據恢復。解擴過程是重新恢復原始帶寬的過程。很明顯，同樣的代碼必須在事先知道在傳輸通道兩端的信息。（在某些情況下，在調制和解調的過程中代碼應該是知道的）。 輸電鏈擴頻代碼接收鏈擴頻代碼數據輸入射頻輸出射頻輸入rf in射頻連接相同的配置序列數據輸出圖1.擴頻通信系統擴頻的優點抗干擾性能和抗干擾的影響擴頻技術有很多優點。.抗干擾性是最重要的一個優點。有意或無意的干擾和干擾信號都是不希望存在的因?yàn)樗鼈儾话瑪U(kuò)頻密鑰。只有期望信

5、號才有密鑰，在解擴過程中才會被接收器接收，如圖5。輸電鏈擴頻代碼接收鏈擴頻代碼數據輸入射頻輸出射頻輸入rf in射頻連接數據輸出數據 干擾數據擴展和干擾擴展數據擴展數據擴展和干擾圖5.擴頻通信系統。注意，解擴鏈路中數據信號被傳輸?shù)耐瑫r(shí)干擾能源也被傳輸。無論在窄帶或?qū)拵е?，如果它不涉及解擴過程，你幾乎可以忽略干擾。這種抑制反應也適用于其他沒有正確密鑰的擴頻信號。因此不同的擴頻通信系統可以工作在同一頻段，例如cdma。值得注意的是，擴頻是寬帶技術，但反之則不然：寬帶技術不涉及擴頻技術?？菇孬@抗截獲是擴頻通信技術的第二個優勢。由于非法的聽眾沒有密鑰用于原始信號傳播，這些聽眾無法解碼。沒有合適的鑰匙，

6、擴頻信號會出現噪音或干擾。（掃描方法可以打破的這些密鑰，但是密鑰是短暫的。）甚至更好，信號電平可以低于噪聲水平，因?yàn)閿U(kuò)頻傳輸降低了頻譜密度，如圖6。（總能量是相同的，但它是廣泛存在于頻率的。）因此信息是無形的，這一影響在直接序列擴頻（dsss）技術上有充分的體現。（在下文的dsss作更詳細說明。）其他接收機無法“看到”這種傳輸，它們只能出現在整體噪音水平略有增加的情況下！噪聲基準擴展后的數據噪聲基準數據傳播之前圖6.在被噪音水平之下的擴頻頻譜信號。在沒有正確的擴頻傳輸密鑰的情況下，接收器不能“看到”傳輸過程?？顾ヂ洌ǘ鄰叫?yīng)）無線信道通常具有多徑傳播，即有一個以上的信號從發射機傳到接收器（如圖

7、7）。這種多路徑可以通過空氣的反射或折射以及從地面反射或物體如這些路徑建筑物引起。rxrdtx圖7.信號是如何通過多個路徑到達接收器的。這種反射路徑（r）可干擾直接路徑（d）的現象稱為解擴過程的同步衰落。因?yàn)榻鈹U(kuò)過程使信號d與信號r的同步被拒絕，即使它們包含了相同的密鑰。將反射路徑的信號應用于解擴是個有用的方法。擴頻技術在cdma的應用請注意，擴展頻譜不是一個擴頻調制方案，不應與其他調制方式相混淆。例如我們可以使用擴頻技術發射一個由psk或bpsk的已調信號。.感謝調制的信號的編碼基礎，使擴頻頻譜也可用于其他類型的多址實現（即可以同時進行多個通訊聯系和實際或表面上相同的物理介質共存）。到目前為

8、止，有三個主要的方法可用。fdma-頻分多址fdma分配一個特定的載波頻率給通信信道。不同用戶使用頻譜的切片數是受到限制的（如圖8）。在已有的三種多路存取方法中，fdma在頻帶利用方面是效率最低的。fdma的方法包括methods包括無線電廣播，電視，高級移動電話系統amps等。用戶1 用戶2 用戶3 用戶n頻率(khz,mhz,ghz) fc1 fc2 fc3 fcn圖8. fdma系統中不同的用戶的載波頻率分配。tdma-時分多址tdma的不同用戶彼此間發言和聽取信息時，是根據定義的時隙分配來處理的（如圖9）。不同的通信信道可以建立一個唯一的載波頻率。tdma的例子有全球移動通信系統gsm

9、，dect，tetra和is - 136。用戶1 用戶2 用戶3 用戶n 用戶1 用戶2 用戶3 用戶n時間段時間段時間(ms,us)圖9.在tdma系統中不同用戶的時隙分配。cdma-碼分多址cdma的傳播是由密鑰或代碼決定的（如圖10）。在這個意義上說，擴頻就是一種cdma 。在發射器和接收器密鑰必須提前被定義和確定。它的例子有is - 95(ds)，is- 98，藍牙和無線局域網。用戶1用戶5用戶4用戶3用戶2圖10.cdma系統中相同頻帶有獨特的鑰匙或代碼。當然，人們可以結合上述存取方法，例如，全球移動通信系統gsm結合了tdma和fdma。gsm定義了不同的載波頻率（細胞）的拓?fù)漕I(lǐng)域

10、，并設定時段內每一個細胞。擴頻和（的）編碼密鑰在這一點上，值得重申的是擴頻的主要特點是一個代碼或密鑰必須在發射器和接收器之前就是已知的?，F(xiàn)代通訊的代碼是數字序列必須長期存在和隨機出現的，盡可能地顯示為“噪音像”。在任何情況下，代碼必須確保是可再生的?；蛘呓邮掌鞑荒芴崛∫寻l(fā)出去的消息。因此，該序列是幾乎是隨機的 。這樣的代碼被稱為偽隨機數（prn）或序列。最常用的方法來產生偽隨機是基于反饋移位寄存器的。許多書籍都在介紹偽隨機碼的發展與特征，但是，實際的發展已超出了這些教材所敘述的。注意的是，建立或選擇適當?shù)男蛄谢蛐蛄屑⒉皇俏⒉蛔愕赖?。為了保證有效的擴頻通信，偽隨機序列必須尊重一定的規律如長度、

11、自相關、互相關、正交。比較受歡迎偽隨機序列有barker碼，m序列碼，gold碼，walsh碼等?？紤]到存在更復雜的序列集，給它提供了一個更強大的擴展頻譜鏈路。但是這產生了成本問題：擴頻和解擴都需要在速度和性能都更復雜的電子產品，數字?jǐn)U頻解擴芯片包含幾百萬個等效的2輸入與非門在幾十兆赫間切換。an introduction to spread-spectrum communicationsabstract:this application note is a tutorial overview of spread-spectrum principles.the discussion cover

12、s both direct-sequence and fast-hopping methods.theoretical equations are given to allow performance estimates.relation direct-sequence spread-spectrum(dsss) and frequency-hopping spread-spectrum(fhss) methods.introduction as spread-spectrum techmiques become increasingly popular,electrical engineer

13、s outside the field are eager for understandable explanations of the technology.there are books and websites on the subject,but many are hard to understand or describe some aspects while ignoring others(e.g.,the dsss technique with extensive focus on prn-code generation).the following discussion cov

14、ers the full spectrum(pun intended).a short historyspread-spectrum communications technology was first described on paper by an actress and a musician!in 1941 hollywood actress hedy lamarr and pianist george antheil described a secure radio link to control torpedos.they received u.s.patent #2.292.38

15、7.the technology was not taken seriously at that time by the u.s.army and was forgotten until the 1980s,when it became active.since then the technology has become increasingly popular for application that involve radio links in hostile environments.typical applications for the resulting short-range

16、data transceivers include satellite-positioning systemsgps，3g mobile telecommunications,w-lan(ieee802.11a,ieee 802.11b,ieee 802.11g),and bluetooth.spread-spectrum techniques also aid in the endless race between communication needs and radio-frequency availability-situations where the radio spectrum

17、is limited and is,therefore,an expensive resource.theoretical justification for spread spectrum spread-spectrum is apparent in the shannon and hartley channel-capacity theorem: c=blog2(1+s/n) (eq.1)in this equation,c is the channel capacity in bits per second(bps),which is the maximum data rate for

18、a theoretical bit-error rate(ber).b is the required channel bandwidth in hz,and s/n is the signal-to-nosie power ratio.to be more explicit,one assumes that c,which represents the amount of information allowed by the communication channel,also represents the desired performance.bandwidth (b) is the p

19、rice to be paid,bacause frequency is a limited resource.the s/n ratio expresses the environmental conditions or the physical characteristics (i.e., obstacles ,presence of jammers ,interferences,etc.).there is an elegant interpretation of this equation,applicable for difficult environments,for exampl

20、e,when a low s/n ratio is caused by noise and interference.this approach says that one can maintain or even increase communication performance (high c) by allowing or injecting more bandwidth (high b),even when signal power is below the noise floor. (the equation does not forbid that condition!)modi

21、fy equation 1 by changing the log base from 2 to e (the napierian number) and by noting that in=loge.therefore:c/b=(1/ln2)ln(1+s/n)=1.443ln(1+s/n) (eq.2)applying the maclaurin series development forln(1+x)=x-x2/2+x3/3-x4/4+(-1)k+1xk/k+:c/b=1.443(s/n-1/2(s/n)2+1/3(s/n)3-) (eq.3)s/n is usually low for

22、 spread-spectrum applications. (as just mentioned, the signal power density can even be below the noise level.) assuming a noise level such that s/n 1,shannons expression becomes simply:c/b1.443s/n (eq.4)very roughly:c/ns/n (eq.5)or:n/sb/c (eq.6)to send error-free information for a given noise-to-si

23、gnal ratio in the channel,therefore,one need only perform the fundamental spread-spectrum signal-spreading operation:increase the transmitted bandwidth.that principle seems simple and evident.nonetheless,implementation is complex,mainly because spreading the baseband (by a factor that can be several

24、 orders of magnitude) forces the electronics to act and react accordingly,which,in turn,makes the spreading and despreading operations necessary.definitionsdifferent spread-spectrum techniques are available,but all have one idea in common:the key (also called the code or sequence) attached to the co

25、mmunication channel.the manner of inserting this code defines precisely the spread-spectrum technique.the term spread spectrum refers to the expansion of signal bandwidth,by several orders of magnitude in some cases,which occurs when a key is attached to the communication channel.the formal definiti

26、on of spread spectrum is more precise:an rf communications system in which the baseband signal bandwidth is intentionally spread over a larger bandwidth by injecting a higher frequency signal (figure 1).as a direct consequence,energy used in transmitting the signal is spread over a wider bandwidth,a

27、nd appears as noise.the ratio (in db) between the spread baseband and the original signal is called processing gain.typical spread-spectrum processing gains run from 10db to 60db.to apply a spread-spectrum technique,simply inject the corresponding spread-spectrum code somewhere in the transmitting c

28、hain before the antenna (receiver).conversely,you can remove the spread-spectrum code (called a despreading operation) at a point in the receive chain before data retrieval.a despreading operation reconstitutes the information into its original bandwidth.obviously,the same code must be known in adva

29、nce at both ends of the transmission channel. (in some circumstances,the code should be known only by those two parties.)figure 1.spread-spectrum communication systembandwidth effects of the spreading operationfigure 2 illustrates the evaluation of signal bandwidths in a communication link.figure 2.

30、spreading operation spreads the signal energy over a wider frequency bandwidth.spread-spectrum modulation is applies on top of a conventional modulation such as bpsk or direct conversion.one can demonstrate that all other signals not receiving the spread-spectrum code will remain ad they are,that is

31、,unspread.bandwidth effects of the despreading operation similarly,despreading can be seen in figure 3.figure 3. the despreading operation recovers the original signal.here a spread-spectrum demodulation has been made on top of the normal demodulation operations.one can also demonstrate that signals

32、 such as an interferer or jammer added during the transmission will be spread during the despreading operation!waste of bandwidth due to spreading is offset by multiple usersspreading results directly in the use of a wider frequency band by a factor that corresponds exactly to the processing gain me

33、ntioned earlier.therefore spreading does not spare the limited frequency resource.that overuse is well compensated,however,by the possibility that many users will share the enlarged frequency band (figure 4).figure 4. the same frequency band can be shared by multiple users with spread-spectrum techn

34、iques.spread spectrum is a wideband technology in contrast to regular narrowband technology,the spread-spectrum process is a wideband technology.w-cdma and umts, for example,are wideband technologies that require a relatively large frequency bandwidth, compared to narrowband radio.benefits of spread

35、 spectrumresistance to interference and antijamming effectsthere are many benefits to spread-spectrum technology.resistance to interference is the most important advantage.intentional or unintentional interference and jamming signals are rejected because they do not contain the spread-spectrum key.o

36、nly the desired signal,which has the key, will be seen at the receiver when the despreading operation is exercised.see figure 5.figure 5. a spread-spectrum communication system.note that the interferers energy is spread while the data signal is despread in the receive chain.you can practically ignor

37、e the interference,narrowband or wideband,if it does not include the key used in the dispreading operation.that rejection also applies to other spread-spectrum signals that do not have the right key.thus different spread-spectrum communications can be active simultaneously in the same band,such as c

38、dma.note that spread-spectrum is a wideband technology,but the reverse is not true:wideband techniques need not involve spread-spectrum technology.resistance to interception resistance to interception is the second advantage provided by spread-spectrum techniques.because nonauthorized listeners do n

39、ot have the key used to spread the original signal,those listeners cannot decode it.without the right key,the spread-spectrum signal appears as noise or as an interferer.(scanning methods can break the code,however,if the key is short.) even better,signal levels can be below the noise floor,because

40、the spreading operation reduces the spectral density.see figure 6.(total energy is the same,but it is widely spread in frequency.) the message is thus made invisible,an effect that is particularly strong with the direct-sequence spread-spectrum (dsss) technique.(dsss is discussed in greater detail b

41、elow.) other receivers cannot “see” the transmission;they only register a slight increase in the overall noise level!figure 6.spread-spectrum signal is buried under noise level.the receiver cannot “see” the transmission without the right spread-spectrum keys.resistance to fading (multipath effects)w

42、ireless channels often include multiple-path propagation in which the signal has more that one path from the transmitter to the receiver (figure 7).such multipaths can be caused by atmospheric reflection or refraction, and by reflection from the ground or from objects such as buildings.figure 7.illu

43、stration of how the signal can reach the receiver over multiple paths.the reflected path (r) can interfere with the direct path (d) in a phenomenon called fading.because the dispreading process synchronizes to signal d,signal r is rejected even though it contains the same key. methods are available

44、to use the reflected-path signals by dispreading them and adding the extracted results to the main one.spread spectrum allows cdmanote that spread spectrum is not a modulation scheme,and should not be confused with other types of modulation.one can,for example,use spread-spectrum techniques to trans

45、mit a signal modulated by psk or bpsk.thanks to the coding basis,spread spectrum can also be used as another method for implementing multiple access (i.e.,the real or apparent coexistence of multiple and simultaneous communication links on the same physical media).so far,three main methods are avail

46、able. fdma-frequency division multiple accessfdma allocates a specific carrier frequency to a communication channel.the number of different users is limited to the number of “slices” in the frequency spectrum (figure 8).of the three methods for enabling multiple access,fdma is the least efficient in

47、 term of frequency-band usage.methods of fdma access include radio broadcasting,tv,amps,and tetrapole.figure 8.carrier-frequency allocations among different users in a fdma system.tdma-time division multiple access with tdma the different users speak and listen to each other according to a defined a

48、llocation of time slots (figure 9).different communication channels can then be established for a unique carrier frequency.examples of tdma are gsm,dect,tetra,and is-136.figure 9. time-slot allocations among different users in a tdma system.cdma-code division multiple accesscdma access to the air is

49、 determined by a key or code (figure 10).in that sence,spread spectrum is a cdma access.the key must be defined and known in advance at the transmitter and receiver ends.growing examples are is-95 (ds),is-98,bluetooth,and wlan.figure 10.cdma systems access the same frequency band with unique keys or codes.one can,of course,combine the above access methods.gsm,for instance,combines tdma and fdma.gsm defines the topological areas (ce