消防管道施工質量檢驗和試驗計劃Fire-fighting Pipe Construction Quality Inspection and Test Plan

1、消防管道施工質量檢驗和試驗計劃Fire-fighting Pipe Construction Quality Inspection and Test Plan Inspection and Test Plan for Storage Tanks儲 罐消 防 管 道 施 工 質 量 檢 驗 和 試 驗 計 劃NO.序號Control point控制點名稱Contents for inspection檢查內容Standards依據檢準InspectionMethod檢查方法InspectionScale檢查比例Check Grade 檢查級別Records記錄資料ResponsibleDepart

2、ment責任部Note備注1Review of drawing圖紙會審Drawing content and interface of all the specialties圖紙內容、各專業銜接GB50235-97Review and check審查核對All全部CReview records會審記錄Design Dept設計部Technical Dept技術部 3Training of technique技術交底Situation of standardization ,guidance and practicability規范化、指導性、實用性情況Construction procedur

3、e document施工技術文件Witness見證All全部CRecords of training交底記錄Technical Dept技術部Constr. Dept 施工部6Metrology instruments計量器具Check whether the instruments are enough and still validity計量器具齊備、且在檢定期內Relevant requirements相關要求Review and check審查核對All全部CVerification certificate檢定證書QA/QC Dept QA/QC部7Welding technique焊

4、接工藝Whether tTechnique assessment welding technique card and welder qualification焊接工藝評定、焊接工藝卡和焊工考試JB/T4708-2000Review and check training and examination審查核對培訓和考試All全部BTechnique assessment and technique card training records工藝評定、工藝卡、考試記錄BSF、BB、BSCDDTechnical Dept 技術部QA/QC Dept. QA/QC部8Qualification ch

5、eck資質檢查NDE personnel qualification and welder qualification certificateNDE人員資質、焊工資質證書Relevant requirements of qualification資質等相關要求Review and check審查核對All全部BNDI NDE and welder personnel registration form無損檢測、焊工人員登記表(SH3503-J116)BSF、BB、BSCDDQA/QC Dept QA/QC部NO.序號Control point控制點名稱Contents for inspecti

6、on檢查內容Standards依據檢準InspectionMethod檢查方法InspectionScale檢查比例Check Grade檢查級別Records記錄資料ResponsibleDepartment責任部Note備注8Qualification check資質檢查Measurement instruments and inspection equipment測量儀器、檢測設備Relevant requirements of qualification周檢等相關要求Review and check審查核對All全部CInstrument and equipment registrat

7、ion form儀器設備登記表QA/QC Dept QA/QC部9焊接材料Welding materialsQuality of the supplied welding material (includes appearance)焊材供貨質量（包括外觀質量）GB50235-97等相關要求Relevant RequirementsCheck the quality guarantee檢查質保書Spot test抽查B質保書quality guaranteeBSF、BB、BSCDDMaterial Dept.材料部QA/QC Dept. QA/QC部10焊接材料Welding materials

8、Purification extent of the protection gas保護氣體純度檢驗GB50235-97等相關要求Relevant RequirementsGas composition analysis report檢查氣體含量分析報告Spot test抽查CGas composition analysis report氣體含量分析報告Material Dept.材料部QA/QC Dept. QA/QC部11Pipe, fitting delivery inspection管道組成件及管道支承件到貨檢查Documentation inspection and quality c

9、ertificate資料檢查、質量證明書GB50235-97Review and check審查核對All全部BInspection records of material delivery材料到貨檢查記錄BSF、BB、BSCDDMaterial Dept.材料部QA/QC Dept. QA.QC部12Pipe Support Installation and Welding管道支架安裝與焊接Supports Position, dimension and welding appearance支架安裝位置、尺寸、及焊接外觀質量GB50235-97Visual check目測All全部CCons

10、truction records施工記錄Constr. Dept 施工部QA/QC Dept QA/QC部NO.序號Control point控制點名稱Contents for inspection檢查內容Standards依據檢準InspectionMethod檢查方法InspectionScale檢查比例Check Grade檢查級別Records記錄資料ResponsibleDepartment責任部Note備注13Pipe Pre-fabrication管道預制Notch quality, Fitting Quantity, Specification & material,

11、and relevant serial number 管子切口質量、管道組成件的數量、規格及材質、以及各組成件的順序號GB50235-97, Pipe Isometric Drawing, etc. GB50235-97、管道系統單線圖等相關要求Visual check檢查All全部BConstruction records施工記錄BSF、BB、BSCDDConstr. Dept 施工部QA/QC Dept QA/QC部14Pipe Welding管道焊接Welding Appearance quality, Traceability, NDE reports and Rate管道焊接外觀質量

12、、焊接追蹤、NDE檢測報告及比例GB50235-97, relevant requirementsGB50235-97等相關要求Visual check觀察、審查核對All全部BWelding Traceable Records, NDE reports焊接追蹤記錄、NDE檢測報告(SH3503-J130)BSF、BB、BSCDDQA/QC Dept. QA.QC部（按批次檢查）Per batch sequence15Pipe Installation管道安裝Inspection Certificates for Pipe, fitting and supports管道組成件及管道支承件等已檢

13、驗合格GB50235-97Documentation inspection and on-spot check資料檢查現場檢查All全部BComplete QA/QC Inspection Records質檢記錄齊全(SH3503-J407)BSF、BB、BSCDDQA/QC Dept. QA.QC部16Pipe Hydrotest管道壓力試驗If no Leakage, deformation, pressure decrease, it is acceptable檢查無泄漏、金屬變形及壓力表降壓現象，則試驗合格GB50235-97 Procedure documentation程序文件Do

14、cumentation inspection and onside check現場檢查資料檢查All全部BTest records of the internal floating roof試驗記錄(SH3503-407)BSF、BB、BSCDDTechnical Dept 技術部Constr. Dept施工部 QA/QC Dept QA/QC部NO.序號Control point控制點名稱Contents for inspection檢查內容Standards依據檢準InspectionMethod檢查方法InspectionScale檢查比例Check Grade檢查級別Records記錄

15、資料Responsible Department責任部Note備注17Blasting and Cleaning管道吹掃與清洗Continuous water washing, discharged water shall be the same with inlet water水沖洗應連續進行，以排出口的水色和透明度與入口水目測一致為合格GB50235-97 Procedure documentation程序文件Visual check目測檢查All全部BCheck records檢查記錄(SH3503-J409)BSF、BB、BSCDDTechnical Dept 技術部Constr. D

16、ept 施工部QA/QC Dept QA/QC部18Galvanization管道鍍鋅Surface Quality and Thickness shall comply with requirements表面質量及厚度是否符合要求GB/T 13912-2002GB8923-88Visual Check and Thickness Measurement目測及測厚儀檢查Spot test抽查BOriginal records原始記錄BSF、BB、BSCDDTechnical Dept 技術部Constr. Dept 施工問門QA/QC Dept QA/QC部19Sand blasting噴砂除

17、銹Check whether surface quality meets with requirements表面質量是否符合要求Procedure documentation程序文件Surface check表面檢查All全部BOriginal records原始記錄BSF、BB、BSCDDConstr. Dept 施工部QA/QC Dept QA/QC部20Painting涂漆Check painting equipments, materials, painting thickness of every layer, painting holiday and adhesion, etc對涂

18、漆設備、油漆材料、每層涂漆質量和厚度等進行檢查Procedure documentation程序文件Visual Check and Thickness Measurement目測及測厚儀檢查Spot test抽查Brecords measuring reports防腐工程記錄、測量報告(SH3505-J117)BSF、BB、BSCDDConstr. Dept 施工部QA/QC Dept QA/QC部NO.序號Control point控制點名稱Contents for inspection檢查內容Standards依據檢準InspectionMethod檢查方法InspectionScale

19、檢查比例Check Grade檢查級別Records記錄資料ResponsibleDepartment責任部Note備注21Completion and acceptance交工驗收Whole inspection總體檢查Onsite check現場檢查Surface check表面檢查All全部BRecords of completion and acceptance竣工驗收記錄BSF、BB、BSCDDTechnical Dept 技術部QA/QC Dept QA/QC部Sorting and inspection of documentation records資料記錄整理、檢查Contr

20、act requirements合同要求Check one by one逐項檢查All全部BAs-built dossier竣工資料BSF、BB、BSCDDTechnical Dept 技術部QA/QC Dept QA/QC部Note :1. Procurement Department is responsible for organizing and executing the inspection and test of materials, and QA/QC Department should attend the inspection and test. 材料部為材料的檢驗和試驗的

21、組織和實施部，QA/QC部為參加部；Procurement Department is responsible for：材料部的職責:A. Be responsible for the receipt, inspection and acceptance, storage and delivery of the material and equipment.負責設備、材料的領用、驗收、保管和發放。B. Collect, restore and make record the document (include the introduction, certificate, and the qua

22、lification, and shipping list of the material) on the equipment and material.負責工程用設備、材料的資料（包括說明書、產品合格、證材質證明書、裝箱單等）的收集、登記、保管。C. Take charge of the procurement and management of the construction tools, consuming materials, etc.負責施工機具、措施用料、消耗材料的采購和管理。D. Be responsible for applying the inspection of the

23、 tools and machineries.負責施工機具送檢。2. QA/QC Department is responsible for organizing and executing the inspection and test during construction, Construction Department should attend the inspection and test.QA/QC部為施工過程中檢驗和試驗的組織和實施部，施工部為參加部；QA/QC Department is responsible for ：QA/QC部的職責：A. Carry out the

24、relative rule regulation, quality management system and requirement, and organize the construction according to the concrete detail and method. 貫徹本項目有關的技術法規和標準，質量方面的管理制度和規定，結合本項目的實際編制具體實施細則或辦法，并組織實施。B. Carry out the quality plan, construction plan, and the discipline at site, check the technical iss

25、ue verification implementation. And supervise the special process controls.參加質量計劃、施工技術方案、施工技術措施和工藝紀律的執行落實，檢查施工中技術交底情況，監督特殊過程控制。 CBe responsible for the daily management, quality inspection, and acceptance mark.負責工程質量的日常管理工作，負責工程質量的檢查驗證和檢驗狀態標識。 DTake part in the shield construction and the jointly re

26、lation of the different procedure, and be responsible for the inspection results.參加隱蔽工程檢查和各工序之間交接檢驗工作，對檢查確認結果負責。 ETimely collect, treat and classify the important information, and notice CSPCAA/BSFBB/BSCDD.及時收集和處理質量體系運行中出現的問題，收集各種質量信息并進行整理，分類和處理，重要信息應及時向CSPCAA/BSFBB/BSCDD匯報。 FParticipate the constru

27、ction quality evaluation, and clear up the evaluation document, and submission and restore the document.參加工程質量評定，整理質量評定資料，并按規定上報和歸檔保存。 GParticipate the construction inspection of the equipment and materials.參與工程設備、材料的檢驗。 HParticipate the unchecked out products evaluation and coordination.參加不合格品的評審和處

28、置。I Take part in the investigation and analysis of the construction accident and submit the relative dealing advices.參加質量事故調查、分析，提出事故處理意見。JOrganize qualification test of the special worker to ensure they were capable of their positions. Supervise the specialist workers have the relative qualificatio

29、n.對特殊工種適時組織資格考試，保持持證上崗。對特殊工種持證上崗進行監督。KBe responsible for the inspection and evaluation of the construction and take part in the acceptance of the construction.負責工程質量檢驗和評定，參與工程交工驗收。3Technical Department be responsible for: 技術部的職責:A. the construction management. Carry out the relative rule regulation,

30、 quality management system and requirement, and organize the construction according to the concrete detail and method. Continuously to perfect the inspection measure to ensure the applying inspection hands.負責工程技術管理工作。貫徹本項目有關的技術法規和標準，質量方面的管理制度和規定，結合本項目的實際編制具體實施細則或辦法，并組織實施。不斷完善檢驗手段，保證適應的檢驗力量配備。B. Take

31、 charge of the technical communication with the Guangdong petrochemical engineering design institute, and CSPCAA Shanghai medical industry design institute design interface, and organize meeting to present all detailed information of design.負責與廣東省石油化工設計院、中石化集團上海醫藥工業設計口院的技術聯絡，組織參加設計交底和圖紙會審。the auditi

32、ng and reviewing of the drawings.C. Organize the prophase preparation work of the construction, and drawings, craft valuation, training, difficulties overcome, compiling the technical construction measures and guidance and audition.組織項目部施工前期技術準備，進行圖紙會審，工藝評定，組織培訓，攻關，編制施工技術方案（措施）/作業指導書， 并進行審核。D. Carry

33、 out the quality plan, construction plan, and the discipline at site. And resolve the problems come across in the process of the construction control.參加質量計劃、施工技術方案、施工技術措施和工藝紀律的執行落實，解決施工中技術、工藝及質量問題，監督特殊過程控制。E. Carry out the technology management at site, resolving the difficulties come across in the

34、technology and craft.負責現場施工的技術管理，解決施工中的技術、工藝問題。F. Take charge of the receiving, filing, sending and managing of the deviation of the drawings, design, etc.負責施工圖紙、設計變更等工程技術文件的接收、發放和管理、歸檔工作。G .Check and collect the construction team record and do the dairy. Compile the document, and sum up the experie

35、nces of the construction and take charge of the accuracy and timely of the document. 檢查、收集班組施工記錄，做好施工日記，整理交工資料。負責編制交工資料、竣工圖和施工技術總結，對交工資料的及時性、準確性負責。H. Take part in the shield construction and the jointly relation of the different procedure, and be responsible for the inspection results.參加隱蔽工程檢查和各工序之間

36、交接檢驗工作，對檢查確認結果負責。I. Take part in the investigation and analysis of the construction accident and submit the relative dealing advices.參加質量事故調查、分析，提出事故處理意見。J. Organize qualification test of the special worker to ensure they were capable of their positions.對特殊工種適時組織資格考試，保持持證上崗。K. Take part in the inspe

37、ction and evaluation of the construction and take part in the acceptance of the construction.參加工程質量檢驗和評定，參與工程交工驗收。4. Class-A quality control items, which are also called stop points are the key construction procedures, resulting in the quality concern of the construction. It must be jointly inspecte

38、d, measured and confirmed by engineers and quality controller of relevant specialties, major principals of construction teams, and relevant supervisor from CSPCAA/BSFBB. A級質量控制點也稱停止點，它是關鍵、重要的施工工序，其質量后果對施工產品質量影響的程度是嚴重的。必須由質監站、BSFBB/BSCDD相關監理員相關專業工程師、質檢員、施工隊主要負責人、共同檢查、測量和確認.Relevant supervisors from C

39、SPCAA/BSFBB shall be informed to move in the field in writing 24h before Class-A quality control items is performed. A級質量控制點須提前24h書面通知CSPCAA/BSFBB相關監理員到場。Class-A quality control items must not performance the following process until the completion work have been accepted and approved by the PMC A級質量

40、控制點必須經驗收各方確認為合格并簽署齊全后方可進行下道工序施工。5. This type of quality control items which are also called witness point are the very important construction procedures, resulting in the quality concern of the construction. It must be jointly inspected, monitored and controlled by engineers and quality controller of relevant specialties, and major principals of construction teams.B級質量控制點也稱見證點，它是關鍵的施工工序，其質量后果對施工產品質量影響的程度是較嚴重的。必須由相關專業工程師、質檢員、施工隊主要負責人、BSCDD相關監理員共進行檢查和監督、控制.Relevant supervisors from CSPCAA/BSFBB shall be informed to move in the field in writing 12 hours b