




版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
1、該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:Preface, ContentsIntroduction1Functionality2SIMATIC HMIDesign3Mobile Panel 170Safety4CommissioningEquipment Manual5Operation6Screen Objects7Special Functions for Mobile Operation and Monitoring8System Settings9Installation10Dimensions11Memory Cards12Maintenance and Repair1
2、3Operating System Update14AppendicesAbbreviations, Glossary, IndexThis manual has the Order No.: 6AV6591-1DC30-0AB0Release 09/02A5E00176605-01該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:Releas2Safety NotesThis manual contains notices which you should observe to ensure your own per- sonal safety, as well as to protec
3、t the product and connected equipment. These notices are marked as follows according to the level of danger:Dangerindicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ! Warningindicates a potentially hazardous situation which, if not avoided, cou
4、ld result in death or serious injury. ! Cautionused with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. ! Cautionused without the safety alert symbol indicates a potentially hazardous situation which if not avoided,
5、may result in property damage.Noticeindicates that unwanted events or status can occur if the relevant information is not observed.Notedraws your attention to particularly important information on the product, handling the product, or to a particular part of the documentation.該文檔是極速PDF編輯器生成,如果想去掉該提示
6、,請并:Release 09/02QualifiednelEquipment may be commissioned and operated only by qualifiednel.Qualifiednel within the meaning of the safety notices in this manual are per-sons who are authorized to commission, ground and identify equipment, systems and circuits in accordance with safety engeneering s
7、tandards.Intended UsePlease note the following:WarningThe device may only be used for the application cases specified in the catalog and the technical description and may only be used in combination with third-party equipment and components recommended or approved by Siemens.Startup must not take pl
8、ace until it is established that the machine which is to accommodate this component is conforms with the guideline 98/37 EC.Appropriate transport, and appropriate storage, installation and assembly, as well as careful operation and maintenance, are required to ensure that the product operates perfec
9、tly and safely. ! ImpressumEditor and Publisher: A&D PT1 D1Copyright Siemens AG 2002sExclusion of LiabilityWe have checked the content of this publication for compliance with the described hardware and software. However, discrepancies cannot be exclu- ded, with the result that we cannot guarante
10、e total compliance. The informa- tion in this publication is, however, checked regularly, and any necessary corrections are included in he subsequent releases. We welcome any sug- gestions for improvement.The transmission and reproduction of this documentation and the exploitation and communication
11、of its contents are not permitted without expressauthority. Offenders will be liable for compensation for damage.s, especially in he case of the granting of a patent or registra ion of autility mor designSiemens AGBereich Automation & Drives Geschäftsgebiet SIMATIC HMI Postfach 4848, D-9032
12、7 Nürnberg Siemens AG 2002Technical data subject to change.Siemens Aktiengesellschaft6AV6591-1DC30-0AB0該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:Releas2該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:PrefaceThis manualThe “Mobile Panel 170” Equipment Manual is part of the SIMATIC HMI documen- tation.The manual provides operation,
13、 installation, configuration planning and mainte-nancenel with information concerning configuration, functional scope,installation and operation of the Mobile Panel 170.HistoryThe release of this manual corresponds to the following versions of the ProTool CS configuration software:Mobile Panel 170 E
14、quipment Manual6AV6591-1DC30-0AB0vReleaseCommentProTool CSRelease 09/02First edition of the “Mobile Panel 170” equipment manualFrom V6.0 + SP2該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:Relea02NotationThe following conventions are used throughout this manual:Text in the operating unit display is presented in this ty
15、pe- writer font.Symbolic names representing tag values on the screen are presented in this italic typewriter font.Functions available for selection are presented in this italic font.The names of keys and buttons are displayed in this font.Motor offTagScreensESCTrademarksThe following names are regis
16、tered trademarks of the Siemens AG: HMIâ SIMATICâ SIMATIC HMIâ SIMATIC Mobile Panel 170â ProAgentâ ProToolâ ProTool/Liteâ ProTool/ProâThe remaining trademarks in this documentation may be trademarks, whose use by third parties for their own purposes could viol
17、ate the rights of the owner.Mobile Panel 170 Equipment Manual6AV6591-1DC30-0AB0vi該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:Release 09/02refA&D Technical SupportAvailable round the worldwide:NuernbergJohnson CitySIMATIC HotlineThe languages of the SIMATIC Hotlines and the authorization hotline are generally Ger
18、man and English.Mobile Panel 170 Equipment Manual6AV6591-1DC30-0AB0viiWorldwide (Nuernberg)Technical Support24 hours a day, 365 days a year Phone:+49 (0) 180 5050-222Fax:+49 (0) 180 5050-223:adsupport GMT:+1:00Europe / Africa (Nuernberg)AuthorizationLocal time: Mon.Fri. 7:00 to 17:00Phone:+49 (0) 18
19、0 5050222Fax:+49 (0) 180 5050-223:adsupport GMT:+1:00United States (Johnson City)Technical Support and AuthorizationLocal time: Mon.Fri. 8:00 to 17:00Phone:+1 (0) 770 740 3505Fax:+1 (0) 770 740 3699:isd-callcenter GMT:5:00Asia / Australia ()Technical Support and AuthorizationLocal time: Mon.Fri. 8:3
20、0 to 17:30Phone:+86 10 64 75 75 75Fax:+86 10 64 74 74 74:adsupport.asia GMT:+8:00該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:PrefaceRelea02Service & Support on the InternetThe SIMATIC Customer Support provides you with additional information about SIMATIC products through online services: General current informa
21、tion can be obtained in the Internet under Current product information, FAQs, tips and tricks and downloads which you may find useful are available: in the Internet underTraining CenterWe provide appropriate courses in order to simplify your introduction to the world of automation systems. Please co
22、ntact your regional Training Center or the Train- ing Center headquarters in D 90327 Nürnberg.Telephone: Internet:+49 (911) 895-3200infoOther supportIn the case of further queries concerning SIMATIC HMI products, please contact the Siemens representatives in the subsidiaries and branches respon
23、sible for your area.The addresses can be found: in the Siemens Catalog ST 80in the Internet under in the Interactive Catalog CA01Mobile Panel 170 Equipment Manual6AV6591-1DC30-0AB0viii該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:Release 09/02refSIMATIC HMI DocumentationThe SIMATIC HMI Documentation includes the follo
24、wing components: User guides forconfiguration software runtime softwarecommunication between PLC and operating unit Equipment manuals for the following operating units:SIMATIC PCMP (Multi Panel)OP (Operator Panel) TP (Touch Panel) TD (Text Display)PP (Pushbutton Panel)SIMATIC Mobile Panel 170 Online
25、 help for the configuration software Installation guidesQuick reference manualsThe following table provides titles of SIMATIC HMI manuals which contain informa- tion beyond the scope of this equipment manual.Mobile Panel 170 Equipment Manual6AV6591-1DC30-0AB0ixDocumentationTarget groupContentsGettin
26、g StartedQuick Reference ManualBeginnersExamples are used to explain the configuration of a screen with various objects, changing a screen, and a message step-by-step.This documentation is available for text-based displays, graphics displays, touch panels, Windows-based systems.ProToolConfiguring Wi
27、ndows- based SystemsUsers GuideConfiguration plannersProvides information on the configuration software: principles of the configuration detailed description of objects and functions which can be configured examples該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:PrefaceRelea02Mobile Panel 170 Equipment Manual6AV6591-1DC
28、30-0AB0xDocumentationTarget groupContentsProTool Online HelpConfiguration plannersProvides information on working with ProTool on the configuration computer: context-sensitive help detailed instructions and examples detailed information all information from the user guidesCommunication for Win- dows
29、-based SystemsUsers GuideProgrammersProvides information on connecting Windows-based systems to the following PLCs: SIMATIC S5 SIMATIC S7 SIMATIC 505 SIMATIC WinAC SIMOTION PLCs of other manufacturers This documentation describes the configuration and parameters necessary for connecting the operatin
30、g unit to a PLC and the data network, and the user data areas which serve for data exchange between the operating unit and PLC.該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:Contents1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112Fu
31、nctionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .313234353633.43.5Mobil
32、e Panel 170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Connection Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Connectivity Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33、. . . . . . . . . . . . . . .Wall Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Protective Covers and Protective Foil . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Safety4.6. . . . . . . . . . . . . . . . . .
34、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operational Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35、. . . .Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STOP Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Connectivity Box Plus . . . . . . . . . . . . . . . . . . . . . . . .
36、. . . . . . . . . . . . . . . . . . . .Connectivity Box Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Acknowledgement Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Risk analysis of the system to be monitored . . . . .
37、. . . . . . . . . . . . . . . . . . . .41414243434546484105Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51525353545555595105125125145..15.8.2Initial Startup . . . . . . . . . . . . .
38、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Recommissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Start downloading manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Start downloa
39、ding automatically during normal operation . . . . . . . . . . . . .Operating Unit Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Options for Download Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Test the Configuration . . . . .
40、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Uploading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ProSave Service Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41、. .Backup/Restore the Internal Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . .Backup/Restore on CF memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Backup/Restore using ProSave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Mobile Panel 170
42、 Equipment Manual6AV6591-1DC30-0AB0xi該文檔是極速PDF編輯器生成,如果想去掉該提示,請并:ContentsRelea025.95.10License Transfer (Authorization) Using ProSave . . . . . . . . . . . . . . . . . . . . .Load Applications Using ProSave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5185206Operation . . . . .
43、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6161636364656768696116146166176..Holding and Setting Down the Operating Unit . . . . . . . . . . . . . . . . . . . . . . .Operating Elements
44、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operating touch elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45、. . . . .Enter numeric values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Enter alphanumeric values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call in help text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46、. . . . . . . . . . . . . . . . . .Membrane Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Acknowledgement Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STOP button . . . . . . . . . . . . . . . . . . . . . . .
47、. . . . . . . . . . . . . . . . . . . . . . . . . . . .Knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Key-operated Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pushbutton With Inte
48、grated LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Screen Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71717475777979711711713714715717718719720721722723724721.17.11
49、.3Operating Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Logging On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Overview of Screen Objects . . . . . . . . . .
50、. . . . . . . . . . . . . . . . . . . . . . . . . . . .Input Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Selection Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Date/Time . . . .
51、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Graphic Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52、 . . . . . . . . . . . . . . . . .Status Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Messages . . . . . . . . . . .
53、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ALARM_S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Message line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54、 . . . . . . .Message window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Message page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Message buffer . . . . . . . . . . . . . . . . . . . . . . . . .
55、 . . . . . . . . . . . . . . . . . . . . . . . .Message display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Single message display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bar Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 公司銀行本票管理制度
- 售票崗位風險管理制度
- 別墅現場裝修管理制度
- 開發與測試的協同工作模式探討試題及答案
- 醫院推行電腦管理制度
- 廠區裝修現場管理制度
- 學校教室規章管理制度
- 醫院職工假期管理制度
- 公司禮品贈送管理制度
- 沖床加工車間管理制度
- 新概念第二冊 Lesson 41課件(共49張PPT)
- 食品添加劑復習題含參考答案
- 部編人教版二年級語文上冊寫字表(帶筆順)
- pp板檢測報告參考資料
- 港口碼頭企業安全生產標準化宣貫培訓
- 杠桿臂鉆孔鉆床夾具設計
- 員工工資條模板
- 2023年湖南省長沙市中考英語真題(原卷)
- 云南省楚雄州2023年六年級數學第二學期期末達標測試試題含解析
- 會議實務之安排與會人員返程
- 2023-2024人教版小學5五年級數學下冊(全冊)教案
評論
0/150
提交評論