




已閱讀5頁,還剩1頁未讀, 繼續免費閱讀
版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
Calculation and Analysis of the Thermophysical Parameters of Micro-emulsified Ethanol diesel Blended Fuel Key words: ethanol diesel; micro emulsified fuel; thermophysical parameters Abstract :The micro-emulsified ethanol-diesel blended fuel is an ideal alternative oxygenous fuel for diesel engines due to its physical and chemical properties and excellent combustion characteristics Fueled with this fuel, a diesel engine can give off remarkably lower harmful emissions, especially particulate. It is necessary to take into account instantaneous variations of the thermophysical parameters of blended fuels with temperature and pressure. For these reasons, this puper use the empirical formulas calculates the thermophysical parameters of this blended fuel, including the specific heat capacity, viscosity, thermal conductivity and diffusion coefficient. And the effects of the temperature, pressure and ethanol content on the initial blended fuels condition were investigated. The results show that the addition of some ethanol to the diesel oil can contribute to the evaporation of the micro-emulsified ethanol-diesel blended fuel, and these empirical formulas were to be employed to calculate the thermophysical parameters of this blended fuel. Introduction The increasing petroleum price and environmental concern due to global warning has developed the firust in search of renewable fuels for diesel engines. Recently, much attention has been paid to the development of alternative fuels in order to meet the emission standards and to reduce the dependency on fossil fuel1-3. Especially, ethanol has been considered as one of major alternative fuels, as it can be derived from renewable sources. This fuel is well-oxygenated, therefore the adicition of some ethanol to the diesel oil have a great potential to reduce emissions 4-6. When micro-emulsified diesel researched for a researched for a number of applications in diesel engines and other sarfimary combustion appliances, it is necessary to take into account instantaneous variations of the thermophysical parameters of blended fuels with temperature and pressure. However, the relations are acquired from design handbooks difficultly, especially for the surfactant such as span80.therefoce,the relationships among temperature, pressure and the thermophysical parameters need to be established. For these reasons, this paper takes the micro-emulsified ethanol-diesel for eacmple, and using the empirical formulas calculates the thermophysical parameters of this blended fuel. And the effects of the ambient temperature, pressure and ethanol content on the initial blended fuels condition are investigated. preparation of the micro-emulsified ethanol-diesel In the course of the experiments, the reagents contain diesel, ethanol and span80, and essential equipment contains JJ-1 fixed time electrically operated mixer and JY 10001 electronic balance. The preparation process of the micro-emulsified ethanol-diesel blended fuel involves the following steps. At first, 15g of diesel and 3g of span80 are mixed well in a beaker. Then, 0.lg of ethucd each time is added. Until these mixtures became turbid, the mass of ethanol dissolved completely is 2.8g. There are three types of the fuel ratio: system 1-78.9% diesel, 5.3% methanol diesel and 15.8% span80; system 2-75.0% diesel, 10.0%methanol and 15.0% span80; system 2-73.2% diesel, 12.2% methanol and 14.6% span80 by mass. The calculation of the thermophysical parameters (1)The calculation of the enthalpy of vaporization At first, using the Riedel method calculates the enthalpy of vaporization of the ith species at normal boiling point 7. Then, using the relation between 4H and T put forward by Watson calculates the enthalpy of vaporization of the ith species at any temperature. Its mathematical expression is given by the equation (1). where Tc is the critical temperature, Tbr is the ratio of the normal boiling temperature to the critical temperature, and the unit of the enthalpy of vaporization is kJ/mol. According to Eq.(1), for at any temperature, their mathematical expressions are When the enthalpy of vaporization of the ith species is calculated by Eqs.(2)the enthalpy of vaporization of blended fuel is calculated based on the following equation. Where Hvi is the enthalpy of vaporization of the ith species, xi is the corresponding molar fraction Tc and Pc are the critical temperature and critical pressure, respectively, Tbr is the ratio of the normal boiling temperature to the critical temperature. Fig.1 represents the relation of between the enthalpy of vaporization and ambient temperature There are three types of the fuel ratio by mass at an ambient pressure of 1.OMPa. According to Fig.l, the enthalpy of vaporization of the micro-emulsified ethanol-diesel blended fuel decreases with the increase of both the temperature and ethanol content. After the addition of some ethanol to the diesel oil the enthalpy of vaporization of mixed fuel decreases and the evaporation rate increases significantly. That is to say, the droplet radius becomes smaller, which can improve the fuel mixing with air and in-cylinder combustion. (2) The calculation of the heat of formation The heat of formation of various compounds is calculated conveniently and the relationship between the molecular structure and its energy is analyzed by the bond en additive method . This method is capable of calculating the heat of formation of unusual specimens, such as the surfactant, and the calculation precision can satisfy the engineering demand. This paper calculates the heat of formation of span80 by the bond energy summation method, and results are showed in the table 1. The heat of formation of diesel (C12H26) and ethanol is calculated by bond energy summation method, or their values are acquired from design handbooks. Following 8, the corrected values of functional group and are -24.7kJ/mol and -12.6kJ/mol, respectively. Hence, the heat of formation of span80 is 1335.0kJ/mol. (3)The calculation of liquid specific heat capacity At first, the gas specific heat capacity of the ith species can be calculated by the group contribution method put forward by Rihani and Doraiswamy9. This method can be used to calculate the gas specific heat capacity in various types of organic compounds. Its mathematical expression is where ni is the functional group number of the ith type. The gas specific heat capacity of span80 by Rshari-Doraiswamy group contribution method put forward is showed in the table 2. The gas specific heat at capacities of diesel(C12H26) and ethanol is calculated by Rihani-Doraiswamy group contribution method, or their values is acquired from design handbooks. Their mathematical expression are Then using Sternling-Brown equation proposed Sternling and Brownby calculates the liquid specific heat capacity of the ith species. They are calculated based on the following equations. Where is the acentric factor, Tc is the critical temperature, Tbr is the ratio of the normal boiling temperature to the critical temperature, and the unit of the specific heat capacity is cal/(mol k). When the liquid specific heat capacity of the ith species is calculated by Eq.(6), the liquid specific heat capacity of liquid mixtures is calculated based on the following equation. where Cpls liquid specific heat capacity of the ith species, and x; is corresponding molar fraction. The combination of Eqs.(4), (6)and (7), we can calculated liquid specific heat capacity of the micro-emulsified ethanol-diesel blended fuel, and the effects of different ambient temperatures on liquid specific heat capacity of the micro-emulsified ethanol-diesel have been presented for in Fig.2. As shown in Fig.2, the liquid specific heat capacity of the micro-emulsified ethanol-diesel blended fuel increases with the ambient temperature rising. After the 400K, the liquid specific heat capacity significantly increases with the ambient temperature. Besides, the liquid specific heat capacity of liquid mixtures increases with the increase of the ethanol content, and the difference among three types of the fuel ratio is reduced. The addition of some ethanol to the diesel oil increases the liquid specific heat capacity. That is to say, more heat is absorbed when the same quality fuel is evaporatived , which is beneficial to reduce the cylinder temperature and can depress the formation of NOx. (4)The calculation of liquid thermal conductivity At first, the liquid thermal conductivity of the ith species at any temperature is given by the equation (8). Then, liquid thermal conductivity of blended fuel can be expressed as equation (8). where r is a constant, and equals to 1 in engineering calculation, yi is the mass concentration of the ith species. Effects of ethanol content and temperature on the liquid thermal conductivity are showed in Fig.3. As shown in Fig.3, the liquid thermal conductivity of the micro-emulsified ethanol-diesel blended fuel decreases with the liquids temperature rising, and it increases with the increase of the ethanol content. The addition of some ethanol to the diesel oil is beneficial to raise temperature and can contribute to the evaporation. (5)The calculation of diffusion coefficient Using the method proposed by Fuller, Schettler and Giddings calculates the gas diffusion coefficient of the ith species. The expression is 10: where T is the absolute temperature, p is the pressure and its unit is bar, and v is the molecular diffusion volume and it is obtained by the sum of the atomic diffusion volume of all types of functional groups, and the unit of DA-B is cm2/s. According to Eq. (15), mathematical expressions the diffusion coefficient of diesel, ethanol and span80 are After the diffusion coefficient of the ith species in the air calculated with Eq.(15), the mean diffusion coefficient of the vapor is calculated by Eq.(17). Effects of temperature and pressure on coefficient of the micro-emulsified ethanol-diesel have been presented in Fig. 4. (13) According to Fig.4, the mean diffusion coefficient of the vapour in the vicinity of the droplet increases with the ambient temperature rising, which is also good for the droplet evaporation. Meanwhile, Fig.2 shows that the mean diffusion coefficient of the vapor decreases with the ambient pressure rising. Since the diffusion coefficient is inversely proportional to the ambient pressure, the diffusion coefficient decreases with the increase of environmental pressure, which reduces the rate of droplet evaporation Summary The thermophysical parameters, including the enthalpy of vaporization, heat of formation, liquid specific heat capacity, liquid thermal conductivity and diffusion coefficient, are caculated using the engirical formulas. The effects of the ambient temperature, pressure and ethanol content at the initial blended fuels condition are investigated. The results shows that the addition of some ethanol to the diesel oil can contribute to the evaporation of the micro-emulsified ethanol-diesel blended fuel and these empirical formulas are employed to calculate the thermophysical parameters of the micro-emulsified ethanol-diesel blended fuel. Acknowledgement This study was financially supported by the National Natural Science Foundation of China under the contract No.50976051 and by the Priority Academic Program Development of Jiangsu Higher Enduction Institutions (PAPD)and by Scientific Research Innovation Foundation for Graduate student of Jiangsu Province(CXZZ 12 0675) and by Automobile Engineering Key Laboratory Opening Fund of Jiangsu Province(No. QC201102). Reference 1Ping X,Mu Y,Yuan J,He H.Carbonyl emission from ethanol-eblended gasol
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 韻母的課件(幼兒園)
- 2025年拉桿球頭項目建議書
- 香坊區中考二模語文試題(圖片版含答案)
- 系統解剖學試題及答案(九)
- 2025年混合式步進電機項目發展計劃
- 2025年轉向齒條項目合作計劃書
- 五年級語文教案 (一)
- 2025年AOI光學檢測系統合作協議書
- 2025年電子測量?jī)x器合作協議書
- 2025年互聯網+政務服務在推動政府職能轉變中的關鍵作用
- 遵義市仁懷市選聘城市社區工作者考試真題2024
- 2025年 江蘇蘇州昆山國創投資集團有限公司第一期招聘考試試卷附答案
- 醫院培訓課件:《靜脈中等長度導管臨床應用專家共識》
- 醫療技術分級授權與再授權申請表
- 兒童腺病毒肺炎診療規范課件
- MBTI人格理論教學課件
- DB65∕T 2810-2009 核桃瑪仁糖-行業標準
- 商業銀行風險預警系統整體架構設計
- UPVC雙壁波紋管
- 型直線振動篩使用說明書中文
- 超市生鮮棚格圖分析模板
評論
0/150
提交評論