基于51單片機的AD0809轉換

1、軟件部分程序#include"reg51.h"#include"absacc.h"#defineCOUNT5000#defineAIN0XBYTE[0x0000]//定義外部地址sbitEOC=P3^3;//轉換結束信號unsignedcharLED_seg[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};//unsignedcharYLED_seg[]={0xbf,0x86,0xdb,0xcf,0xe6,0xed,0xfd,0xf7,0xff,0xef};unsignedcharLED_bit[4]={0x01,0x02,0x04,0x08};unsignedcharLED_buf[3]={0};//fosc=11.0592MHz,9600bps//串口初始化函數9600bpsvoidSbuf_Init(void){SCON=0x50;//10位方式 //波特率設置 PCON=0x00;//波特率不倍增TMOD=(TMOD&0x0f)|0x20;//T1方式2TH1=0xfd; //T1計數初值TL1=0xfd; //ES=1;EA=1; //串口中斷使能TR1=1; //啟動定時器}voidT0_ISR(void)interrupt1{ staticunsignedchari=0; TH0=(65536-COUNT)/256; TL0=(65536-COUNT)%256; if(i==2)//顯示小數點 { P2=~LED_bit[i]; //先送位碼 P1=LED_seg[LED_buf[i]]|0x80;//再送段碼；0x80對應的是段碼口的dp位 } else { P2=~LED_bit[i]; //先送位碼 P1=LED_seg[LED_buf[i]]; //再送段碼 } i++; if(i==3) i=0;}voidTimer0_Init(void){ TMOD=(TMOD&0xf0)|0x01;//定時器0為工作方式1 TH0=(65536-COUNT)/256;//裝初值高八位 TL0=(65536-COUNT)%256;//低八位 ET0=1;//開定時器0中斷 EA=1;//開總中斷 TR0=1;//啟動定時器0}voiddelay(unsignedintn){ unsignedinti; for(i=0;i<n;i++);}voidmain(void){ unsignedinti=0,ad,pre_ad=0; Timer0_Init();Sbuf_Init(); while(1) { AIN0=0; //啟動轉換 i=i; i=i; delay(20); while(EOC==0);//等待AD轉換結束 ad=AIN0;//讀AD轉換結果 if(ad!=pre_ad) { //ad=ad/51;8位A/D轉換精度為1/225*5V=19.6mV LED_buf[2]=(ad*100/51)/100; LED_buf[1]=(ad*100/51